Advertisement
2. INTRODUCTION & SPECIFICATIONS
Manufactured from durable composite material, ergonomically designed to pivot on a 180° axis, maximising the volume and direction of air
flow. Can also be wall mounted. Features 3 speed settings, which can ideally be used for intense cooling power or as an air circulator for the
whole room. Fitted with BS fully approved plug.
SFF12
3.
INSTALLATION & OPERATION
3.1.
The fan can be used either free-standing or wall-mounted (fig.1).
3.2.
To wall-mount: Install 2 x 4mm roundhead screws at 240mm centres in the required position but do not screw home fully.
3.2.1.
Locate the keyhole slots in the fan base over the screw heads and slide the base down.
3.2.2.
Tighten screws down over base, taking care not to over-tighten.
3.2.3.
The fan head will lock in 10° increments to allow the most effective position to be selected.(fig.1)
3.3.
The fan is supplied with a switch providing 'off' and 3 speed settings.(fig.2)
3.4
When the fan is being used free-standing, ensure that the switch is in the 'off' position before connecting to mains power.
3.5.
Ensure that the flex between the mains plug and the fan is routed so as not to present a trip hazard.
4. CARE OF FAN
IMPORTANT: Turn the fan OFF and disconnect from power supply before cleaning.
4.1.
Use only a soft, damp cloth to clean the fan.
4.2.
DO NOT immmerse the fan in water and NEVER allow water to drip into the motor housing.
4.3.
DO NOT use solvents or other chemicals to clean the fan.
4.4.
To clean the fan blades, remove front guard by removing the 4 screws situated on the reverse side of the fan guard.
4.5.
Wipe the blades and guards clean then reassemble front guard.
4.6.
When not in use, place the fan in its original box or otherwise cover to protect from dust and store in a safe, dry childproof location
Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to:
Environmental Protection.
Recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which
is compatible with the environment.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
© Jack Sealey Ltd
Model No: ........................................................................................ SFF12
Fan ø: ................................................................................... 300mm(12" )
Speeds: .................................................................................................... 3
Power: ..................................................................................................45W
Supply: ................................................................................................230V
Height: ............................................................................................ 420mm
www.sealey.co.uk, email: sales@sealey.co.uk or phone:01284 757500.
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
fig.1
fig.2
WEEE Regulations.
Dispose of this product at the end of its working life in compliance
with the EU Directive on Waste Electrical and Electronic Equipment.
When the product is no longer required, it must be disposed of in an
environmentally protective way. Contact your local solid waste
authority for recycling information.
01284 757500
01284 703534
www.sealey.co.uk
Web
sales@sealey.co.uk
email
SFF12
Issue: 1 - 21/01/13
Advertisement
