Download Print this page

Sealey ML11.V2 Instructions page 2

Energy saving lead lamp

Advertisement

5. mainTenanCe
warning! Be sure to disconnect the lamp from the power supply before carrying out any maintenance.
5.1 .
general mainTenanCe
5.1.1. Keep the lamp clean.
5.1.2. check cable for any signs of wear. If the cable is worn/broken, remove the lamp from service immediately and have it repaired by a
qualified electrician.
5.2.
replaCing neOn TUBe (see below)
nOTe: Use only sealey replacement neon tubes, part no: ml11/12/B.
5.2.1. disconnect from the power supply.
5.2.2. remove end cap from the outer plastic tube.
5.2.3. Pull the neon tube holding wire to gently pull the neon tube from its plug and out of the casing.
nOTe: Use caution when handling a tube and dispose of in accordance with local authority guidelines.
5.2.4. Attach the neon tube retaining assembly to the top of the replacement tube (as per the diagram below).
5.2.5. Place the replacement neon tube into the outer casing and locate the neon tube into its fittings in the lamp base.
5.2.6. re-fit the end cap.
environmental protection.
recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which
is compatible with the environment.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
impOrTanT: no liability is accepted for incorrect use of this product.
warranTy: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
inFOrmaTiOn: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
© Jack sealey limited
sole UK distributor, sealey group,
Kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk,
IP32 7Ar
Original Language Version
weee regulations.
dispose of this product at the end of its working life in compliance
with the eu directive on Waste electrical and electronic equipment.
When the product is no longer required, it must be disposed of in an
environmentally protective way. contact your local solid waste
authority for recycling information.
01284 757500
01284 703534
www.sealey.co.uk
W e b
sales@sealey.co.uk
email
Ml11.V2 Issue no.1 30/09/13

Advertisement

loading