Advertisement
4.
OPERATING INSTRUCTIONS
WARNING! Not for use with Petrol or volatile liquids within flash point range -20
F
WARNING! Damage will occur if the pump is run dry. Only for use when submerged in liquid.
F
IMPORTANT! Ensure polarity and voltage are correct before use.
IMPORTANT! Motors damaged due to dry running, incorrect polarity and/or incorrect voltage will not be covered under warranty.
4.1. Prepare pump for use. Ensure that the impeller guard, filter and end cap are all in place and that the hose is firmly attached. Ensure the seal
around the power cable is in place and that the seal cap is screwed tightly down.
IMPORTANT! Should any of the above items appear damaged or in some way malfunctioning DO NOT ATTEMPT TO USE THE PUMP.
Contact your authorised service agent for information and repairs.
4.2. Submerge pump in liquid to be transferred.
4.3. Position stainless steel nozzle as required.
4.4. Attach battery clips to appropriate terminals - take great care and keep clips and battery well away from any liquids.
IMPORTANT! Pump will deliver immediately - be sure to have the pump submerged and the hose correctly positioned before battery
clips are connected.
4.5. Should the pump’s performance deteriorate significantly during usage, remove battery clips from terminals and remove pump from the liquid.
Unscrew end cap and check that it is not blocked. Also check that the filter and impeller are not clogged. Remove any blockages, reassemble
pump and continue use.
IMPORTANT! Do not exceed 15 minutes continuous run time in every 30 minutes.
5.
MAINTENANCE
5.1. Unscrew the end cap for periodical cleaning of the filter. It is recommended that the filter be cleaned after use in particularly viscouse liquid,
or where a significant amount of suspended matter was present in the liquid.
5.2. Check the impeller regularly for any build-up of foreign matter. Clean if necessary.
6.
DECLARATION OF CONFORMITY
Declaration of Conformity
TRANSFER PUMP
Model: TP94
98/37/EC Machinery Directive
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: Call us for a copy of our latest catalogue and promotions on 01284 757525 and leave your full name and address including postcode.
01284 757500
We, the sole importer into the UK, declare that the product listed below is in conformity with the following EEC standards and directives
The construction file for this product is held by the Manufacturer and may be inspected, by a national authority, upon
request to Jack Sealey Ltd.
Signed by Mark Sweetman
01284 703534
C to +80
O
O
9th July 2003
sales@sealey.co.uk
e-mail
C
For Jack Sealey Ltd.
Sole importer into the UK
of Sealey Power Products.
www.sealey.co.uk
9A>
TP94 - 2 - 240703
Advertisement
