Night & Day Furniture Sesame Assembly Instructions Manual

Assembly Instructions
Instructions pour l'assemblage
!
1. Follow the information on the warnings appearing on the upper bunk end structure and on
the carton. Do not remove warning label from bed.
2. Always use the recommended size mattress or mattress support, or both, to help prevent
the likelihood of entrapment or falls.
3. Surface of mattress must be at least 5 in. (127 mm) below the upper edge of guardrails.
4. Do not allow children under 6 years of age to use the upper bunk.
5. Periodically check and ensure that the guardrail, ladder, and other components are in their proper
position, free from damage, and that all connectors are tight.
6. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
7. Prohibit more than one person on upper bunk.
8. Always use the ladder for entering and leaving the upper bunk.
9. Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
10. Use of a night light may provide added safety precaution for a child using the upper bunk.
11. Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed
next to the wall, the guardrail that runs the full length of the bed should be placed against
the wall to prevent entrapment between the bed and wall.
12. The use of water or sleep flotation mattresses is prohibited.
13. STRANGULATION HAZARD – Never attach or hang items to any part of the bunk bed
that are not designed for use with the bed; for example, but not limited to hooks, belts
and jump ropes.
14. Keep these instructions for future reference.
WARNING:
Adult Assembly Required. This package contains small parts. Keep away from children.
Replacement Parts:
Replacement parts, including additional guardrails may be obtained from any
Night & Day Furniture Dealer.
SIZE OF MATTRESS AND FOUNDATION (TWIN TWIN BUNK):
Use only mattress, which is 37 1/2" - 38 1/2" wide and 74"-75" long
on the upper & lower bunk (twin size.)
Ensure that the thickness of the mattress does not exceed 6" and that the
mattress surface is at least 5" (127mm) below upper edge of guardrails.
Certified:
This bunk bed conforms to all applicable consumer product safety standards
16 CFR PARTS 1213, 1500, 1513 and ASTM F-1427
Page 1 de 7 Page 1 de 7
Page 1 of 7 Page 1 of 7
Sesame Twin Bunk Bed
SAFETY WARNING
Lit Jumeaux Superposé "Sesame"
TM
Please Note: Do not
assemble using power tools.
This can cause the bolts to be
overtightened
Note about Warning Labeling
The warning label on your bunk bed headboard is
there by law, and by law is not to be removed. The
adhesive used is difficult to peel off, will tear the
paper leaving a residue that is difficult to clean. We
recommend that you leave it where it is.
N&D 1020