Advertisement
3. CHARGING
Note: Fully charge the lamp before first use.
3.1
Connect the charger into the charging port (Fig.1) on the bottom of the lamp.
Plug into power supply and turn on, the charging LED (Fig.1) will light
RED to show charging has commenced.
3.2
When the battery has fully charged the LED will
4. OPERATION
4.1
Direct the lens away from your eyes before switching on.
Their are two buttons in the switch the top button with an upward facing
arrow turns on the 7 LED array on the top of the lamp. The downward facing
arrow turns on the 30 LED array. See Fig.1.
4.2
Suspend the lamp by the hanging hook. When the lamp is hanging from the
hook it can be rotated through 360° for more precise positioning.
4.3
Alternatively use the integral magnet on the rear of the lamp (Fig.2) to attach
to any ferrous surface.
5. MAINTENANCE
5.1
Keep the inspection lamp free from dirt and grease, use a damp cloth and a
mild detergent. Do not submerge the lamp in water or subject it to any acids
or detergent that may degrade the materials of the lamps construction.
Note: LED arrays are designed to allow individual LEDs to cease functioning
without causing the entire array to fail. This could be as a result of shock or
impact. Shock or impact will invalidate warranty.
Recycle unwanted materials instead of disposing of them as waste.
All tools, accessories and packaging should be sorted, taken to a
recycle centre and disposed of in a manner which is compatible with the
environment.
When the product is no longer required, it must be disposed of in an
environmentally protective way.
Battery Removal
Remove the 4 screws on the back of the lamp (Fig.2) and the four
screws on the top of the lamp surrounding the 7 LED array. Remove the
back casing, and disconnect the wiring to the charger port and from the
battery to the circuit board.
authority guidelines.
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd
are required to inform potential purchasers of products containing batteries (as
defined within these regulations), that they are registered with Valpak's
registered compliance scheme.
Jack Sealey Ltd's Batteries Producer Registration Number (BPRN) is BPRN00705
Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to
www.sealey.co.uk, email sales@sealey.co.uk or phone 01284 757500.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Environmental Protection.
Dispose of batteries according to local
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
change to GREEN.
www.sealey.co.uk
01284 757500
Web
sales@sealey.co.uk
01284 703534
email
LED307
Fig.1
Fig.2
Issue: 2 - 25/10/11
Advertisement
