Table of Contents
Advertisement
Quick Links
FireFly FF-211 Instructions and Specifications
QUICK START
If you're one of those folks that just wants to start using your new FF-211 now and read the instructions
later, it's quite easy to be up and running in just minutes. Three easy steps are all that are necessary for
professional lightning simulation.
1)
Connect lights (up to 1500 watts per channel) to the two power outlets on the rear of your FF-211.
2)
Connect your audio source (CD player, laptop, MP3 player, etc.) to the AUDIO INPUT jack on the
rear panel. Then connect an amplifier and or amplified speakers to the 1/8" stereo AUDIO OUTPUT
jack on the rear of the lightning simulator.
3)
Connect AC power.
No other connections or adjustments are required for basic operation.
WHEN POWERING UP...
Upon power up, the FF-211 goes through a quick self-test and the Lights-Alive logo appears. After a total
of approximately three seconds, the system is fully functional. When you start playing the audio thunder
tracks, the lights will respond.
Advertisement
Table of Contents
Summary of Contents for Firefly FF-211
- Page 1 QUICK START If you’re one of those folks that just wants to start using your new FF-211 now and read the instructions later, it’s quite easy to be up and running in just minutes. Three easy steps are all that are necessary for professional lightning simulation.
- Page 2 The (+) and (–) buttons alters the setting for that particular window. Pressing MENU again will exit the program mode and save our changes. The windows in order are: Press the (+) button for a soft power down. In this mode, the FF-211 goes to sleep. The LCD POWER OFF panel light is also extinguished.
- Page 3 ADVANCED OPERATION The FF-211 will work right out of the box with no adjustments as mentioned in the QUICK START section. However, you can customize some of the settings to optimize the system to better fit your needs.
- Page 4 ELECTRICAL REQUIREMENT – 120 volts, 60 Hz, up to 20 amps (depending on lights connected). PREFERRED ENVIRONMENT – 0ºF to 100ºF, 10-90% (non condensing) relative humidity. – Lights Alive provides an unprecedented three (3) year limited warranty on all FireFly models. WARRANTY We will repair or replace (at our option) any unit that is found to be defective in materials or workmanship within three (3) years of the date of purchase.
- Page 5 In addition, opening the enclosure could subject you to high voltage that could cause serious injury or death. SUPPORT Email: Support@LightsAlive.com If you need help with your FF-211, Lights Alive is here for you. Please feel free to contact us at: Phone: 317.280.3000, option 2 Web: www.LightsAlive.com...
Need help?
Do you have a question about the FF-211 and is the answer not in the manual?
Questions and answers