Summary of Contents for AIS AIS ECG
- Page 1 AIS-ECG System User Manual www.AntechImagingServices.com 1-877-727-6800 Support@AntechImagingServices.com...
- Page 2 The only warranties for AIS products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. AIS shall not be liable for technical or editorial errors or omissions contained herein.
-
Page 3: Table Of Contents
Table of Contents Introduction…………………………………………………………………..…… …...1 -ECG System Components.................1 ® Care and Handling of your AIS®-ECG System............1 Getting Started with your AIS -ECG System………………………..………..2 ® Charging the battery………………………………………..........2 Install the AIS -ECG App on your iOS device…………………………………..…..2 ® Connect the unit to Bluetooth on your iOS device……………………………..…..3 Login to your account......………………………………………..…..3... -
Page 4: Introduction
-ECG device is designed for telemedicine use solely with AIS. • You are able to view the ECG and send it to AIS for review. • You are not able to download, save, or print the ECG from the App. -
Page 5: Getting Started With Your Ais ® -Ecg System
-ECG App on your iOS device ® 1. Login to the Apple App store using the email address registered to your account. 2. Search for “AIS ECG App.” 3. Click “GET” to install the app. 4. Click “OPEN” to open the app. www.AntechImagingServices.com 1-877-727-6800 Support@AntechImagingServices.com... -
Page 6: Connect The Unit To Bluetooth On Your Ios Device
1. Go to iPhone Settings and select “Bluetooth.” 2. Make sure Bluetooth is on. 3. Attach the 4 electrode cables to activate the unit. 4. Select AIS -ECG from the device menu and connect. If prompted, enter 0000 pairing code. ®... -
Page 7: Select Patient
If the patient is not already registered, enter the patient information in your account on www.antechimagingservices.com. Then return to Step 1 and start again. • Please note that patient information cannot be edited in the AIS -ECG App. ® Editing must be done in your account on the AIS website. -
Page 8: Preparing The Patient And Unit For Recording
Preparing the patient and unit for recording IMPORTANT! Make sure the app is ready to record before placing the electrode cables on the animal. Having the app ready decreases the time the animal is restrained and associated stress. Cable placement and starting a recording 1. -
Page 9: Save And Submit A Consult Request
10 seconds or until the SAVE button becomes available. 2. Click the Save icon at top of the screen to end the recording. Longer recordings are possible, but AIS recommends recording no more than 30 seconds. Minimum = 10 seconds Maximum = 30 seconds (recommended) 3. -
Page 10: Adjust Amplitude And Lead View
Adjust amplitude and lead view • Use your finger to swipe up/down to enlarge/shrink the trace amplitude or swipe over the red calibration marker. • A single tap with your finger will toggle between Einthoven, Goldberger, and 6-lead views. Examples of acceptable vs. non-acceptable ECGs Example of an acceptable ECG: •... -
Page 11: Troubleshooting Recording Issues
Troubleshooting Recording Issues Recording issue Recorded resting ECG has a • Wandering baseline can often come from wandering baseline the front paws crossing/touching and hence shorten out the signal flow that otherwise would go through the cables. Holding both front legs with a bare hand can also cause the baseline to wander. -
Page 12: Troubleshooting App Issues
To make a change to a patient’s info, login to your AIS account at www.AntechImagingServices.com. If any other alert appears, or if the system crashes, it is very important for us to receive detailed information describing what you were intending to do in the moment of the error. -
Page 13: Getting Help
Getting Help For additional help with your AIS -ECG unit or the AIS app, contact: ® Technical support 1-877-727-6800 Support@AntechImagingServices.com -ECG System Specifications ® Category Specifications Supported operating systems Special features when the electrode Shock-proof cable is properly attached to the unit... -
Page 14: Manufacture Warranty
Warranty Antech Imaging Services hereby warrants that if any Dextronix, Inc. Heart Monitoring product fails to perform within normal tolerances due to a defect in materials or workmanship, Antech Imaging Services will provide, at no charge, a replacement of Dextronix, Inc. product within 2 years from date of purchase.
Need help?
Do you have a question about the AIS ECG and is the answer not in the manual?
Questions and answers