Power LED
Function LED
Ambient Light Sensor
Imager Window
Power Button
Function Button
Volume Down
Microphone
Camera and Flash
Function Button
Volume Up
NFC
Battery
USB-C for Power/Charging
SD Card Installation
1. Remove Battery
•
Slide latch to unlock position
•
Pull the top side out
2. Install SD Card
•
Remove Battery
•
Pull out MicroSD Card holder
•
Place SD card with contacts
facing down
•
Replace holder
3. Install Battery
•
Insert bottom side of battery and
push top side into place
•
Slide latch to lock position
4. Press Power button to
power on device
SD Card