Summary of Contents for Costar Video Systems CM55VW
- Page 1 ...
-
Page 2: Important Safety Precautions
Important Safety Precautions Thank you for purchasing our high‐performance LCD Video wall. We have taken into consideration all personal safety factors in its design and performed vigorous tests before delivery. However, improper use may cause electric shock or fire. To ensure your safety, prolong the service life of the product and provide optimum performance, read these safety precautions carefully before use. Do not disassemble the video panels Should any of the following instances occur, please remove the power cord and contact our technical support department for repair: *Although you perform all operations according to the instructions, the product cannot work properly; *The product emits abnormal sounds or smell. *There is dangerous high voltage inside the product. No user serviceable components are contained therein. Do not disassemble the video panel. Please contact qualified maintenance personnel for repair. Install the product in a well‐ventilated place free of extreme temperature and moisture. Do not expose it to direct sunlight. The openings on the housing are designed to protect the product against overheating and ensure the durability and reliability of the inside components. Be careful not to block the openings. If the product is not to be used in a long time, please remove the power cord from the power outlet; do not leave it in the standby mode for long. * Read and understand all operating instructions specified in the User's Manual and keep this Manual for future reference. It is dangerous to use any accessory that is not recommended by us. * Protect the power cord from being stepped on by any person or pressed by any object. Do not overload the power outlet or extend the power cord, or there could be a risk of fire or electric shock. LCD screen is a delicate part susceptible to scratches. Do not use any hard object to knock on, press or scratch the splicing unit, or it could be damaged, resulting in high replacement cost. ... - Page 3 ...
-
Page 4: Rohs Compliance
VGA and XGA are registered trademarks of IBM. VESA is the trademark of Video Electronics Standards Association. HDMI, HDMI logo and High‐Definition Multimedia Interface (high definition multimedia digital interface) are the trademarks or registered trademarks of HDMI Licensing LLC. Even if some company or product trademark is not particularly stated, the use of trademark has been fully recognized. Do not alter, decompile, disassemble, decode or conduct reverse engineering to the software installed in the product, or it can be deemed as breach of the law. ROHS Compliance Component Toxic and Hazardous Substances or Elements ... - Page 5 ...
- Page 6 ...
- Page 7 ...
-
Page 8: Specifications
2.2 SPECIFICATIONS ... - Page 9 ...
- Page 10 ...
- Page 11 ...
- Page 12 ...
- Page 13 ...
- Page 14 ...
- Page 15 ...
- Page 16 ...
- Page 17 ...
- Page 18 ...
- Page 19 ...
- Page 20 ...
- Page 21 ...
- Page 22 ...
- Page 23 ...
- Page 24 ...
- Page 25 ...
- Page 26 ...
- Page 27 ...
- Page 28 ...
- Page 29 ...
- Page 30 ...
- Page 31 ...
- Page 32 ...
- Page 33 ...
- Page 34 ...
Need help?
Do you have a question about the CM55VW and is the answer not in the manual?
Questions and answers