Lamps On Reminder - Cadillac 2003 CTS Owner's Manual

Headlamp High/Low-Beam Changer
Push forward on the turn signal/multifunction lever to
change the headlamps from low to high beam. Pull the
lever back and then release it to change from high to
low beam.

Lamps On Reminder

A warning chime will sound if the exterior lamp control
is left on in either the headlamp or parking lamp
position and the driver's door is opened with the
ignition off.
2-48
This light on the instrument
panel cluster will be on,
-
indicating high beam usage.
Flash-To-Pass Feature
This feature allows you to use the high
to signal the driver in front of you that you want to pass.
Pull and hold the turn signal/multifunction lever toward
you to use. When you do, the following will occur:
D
If the headlamps are either off, in low
Daytime Running Lamps (DRL) mode, the
-
high beam headlamps will turn on. They'll stay on
as long as you hold the lever there. Release the lever
to turn them off.
D
If the headlamps are in high
switch to low beam. To return to high
the lever away from you.
-
beam headlamps
-
beam or in
-
beam mode, they will
-
beam, push