Alf FDAT-TX User Manual

Electrostatic Discharge: The product can be damaged by electrostatic
discharge, thus care must be taken when handling the product. Failure to
observe proper handling and installation procedures can cause damage.
Electrostatic Discharge damage can range from performance degradation
to complete product failure.
Important Safety Instructions
Please follow these precautions when using this product:
Read these instructions. Keep these instructions. Heed all warnings. Follow
all instructions.
WATER AND MOISTURE: Designed for indoor use only. The product is
not protected against liquids. It should not be exposed to dripping or
splashing and no objects filled with liquids, shall be placed on the product.
INSTALLATION: The product must always be installed by qualified service
personnel. Install in accordance with the manufacturer's instructions.
Always disconnect the supply power before installing the product. Do not
install near any heat sources such as radiators, heaters, or other apparatus
that produce heat.
POWER SOURCES: The product should be connected to a power supply
only of the type described in the operating instructions or as marked on
the unit.
SERVICING: Contains no user serviceable parts. Do not attempt to repair
the product, as this will void the warranty.
FUSING: Never bypass or use any other type of fuse. Replace only with
the same type of fuse as found in the operating instructions. Fuses must
only be replaced by qualified service personnel. Always disconnect from
power before replacing fuses.