Technaxx FMT100 User Manual

The manufacturer Technaxx Deutschland GmbH & Co.KG hereby declares that this device,
to which this user manual belongs, complies with the essential requirements of the
standards referred to the Directive RED 2014/53/EU. The Declaration of Conformity you
find here: www.technaxx.de/ (in bar at the bottom "Konformitätserklärung"). Before using
the device the first time, read the user manual carefully.
Turn OFF nearby Bluetooth devices to avoid signal interference!
Service phone No. for technical support: 01805 012643 (14 cent/minute from German
fixed-line and 42 cent/minute from mobile networks). Free Email: support@technaxx.de
Features
FM Transmitter for SD cards and USB flash drives up to 32GB
USB input & audio jack to read SD/USB directly and to connect it with MP3
devices
Supports MP3 music files
Display (LCD 3.5x2.5cm) shows frequency information
Saves frequency and music title
Easy handling and installation (Plug & Play)
Operation
1. Insert transmitter to 12V car cigarette socket power.
You take a normal SD card or a USB flash drive and copy the MP3 files from the
PC directly on the memory media. Do not (!) create folders, only copy the music
files.
Search for a free frequency in the car radio (means you hear a hissing and no
radio) and save this frequency on one of the storage spaces of the car radio.
Adjust the same frequency on the device with the |<< or >>| key and confirm it
with the „CH" button.
Plug in the memory media (SD card or USB flash drive) and the playback starts
automatically. Please take a look for the correct card position – plug it into the
device with the contact area on top.
(Normally the device only reads SD cards up to 4GB, but we also tested it
successfully with SDHC cards up to 32GB.)
Important is the FAT32 formating and that the files are „normal" MP3 files
(no .wma files or files coded with DRM).
®
Technaxx
FMT100 Transmitter
* User Manual