Ranger RCI-2985DX Manual page 22

RF SG setting 24.890 MHz.
Set radio to 29.699 MHz, AM RX mode.
RF SG setting 29.699 MHz.
USB Sensitivity Set radio to USB RX mode.
VOL. Control Fully Clockwise.
RF SG setting 28.001 MHz, 0.5uV. Mod off.
LSB Sensitivity Set radio to LSB RX mode.
VOL Control Fully Clockwise.
RF SG setting 27.999 MHz, 0.5uV. Mod off.
FM Distortion Set radio to 28.000 MHz, FM RX mode.
Set MODE switch to FM mode.
RF SG setting 28.000 MHz, 1mV. Mod 3KHz.
NB Adjust Set radio to 28.000 MHz, AM RX mode.
RF SG setting 28.000 MHz, 100uV. Mod off.
Set NB/ANL/OFF switch to NB/ANL position.
Connect Voltmeter to TP1.
AM Squelch Set radio to 28.000 MHz, AM RX mode.
Set SQ Control Fully Clockwise.
RF SG setting 28.000 MHz, 1mV. Mod 30%.
SSB Squelch Set radio to USB RX mode.
Set SQ Control Fully Clockwise.
RF SG setting 28.001 MHz, 1mV. Mod off.
AM S/RF Meter Set radio to 28.000 MHz, AM RX mode.
AM S-Meter RF SG setting 28.000 MHz, 100uV. Mod 30%.
SSB S-Meter Set radio to USB RX mode.
RF SG setting 28.001 MHz, 100uV. Mod off.
Figure 6-1 Transmitter test setup
- 22 -
24.890 and 29.699
MHz
L11, L12 Audio Output > 2V
S/N > 10 dB
L11, L12 Audio Output > 2V
S/N > 10 dB
L4 Audio Output > 3V
Distortion < 10%
L1 DC Voltage to max.
> 2V
VR4 Slowly Adjust very slowly
until squelch
open.
VR3 Slowly Adjust very slowly
until squelch
open.
VR1 "6 bar" on the Level
Meter Indicator and
Meter needle to S9 on
the S scale.
VR2 "6 bar" on the Level
Meter Indicator and
Meter needle to S9 on
the S scale.
just
just