Summary of Contents for LDI Spaces SAFCO E-Z Stor 9200
Page 1
ASSEMBLY INSTRUCTIONS INSTRUCTIONS DE MONTAGE an LDI Spaces Company Minneapolis, MN 55428 INSTRUCCIONES DE ENSAMBLAJE www.safcoproducts.com 9200 E-Z Stor ® Mounting Brackets Supports de montage Soportes PRODUCT WARRANTY REGISTRATION is available online at: www.safcoproducts.com LA GARANTIE DU PRODUIT est LA GARANTÍA DEL PRODUCTO está...
Page 2
TOOLS REQUIRED: 1/2” Wrench, Pencil, HARDWARE PACK Drill with 1/4” bit, Level, Measuring Tape 9200-69NC PARTS LIST Two People Recommended. Lag Screw DESCRIPTION CODE PART NO. Qty.: 6 Mounting Bracket 9200-51BL #9200-77NC Hardware Pack 9200-69NC OUTILS REQUIS: Clef de 12 mm, Crayon, PAQUET MATÉRIEL Perceuse avec mèche de 6 mm , Niveau, Mètre ruban recommande...
Page 3
Mark 3 holes per bracket for studs 16” on center, or 2 per bracket if 24” on center. NOTE: Due to the potential weight Marquer 3 trous par support pour des supports de bois qui sont 40,6 of a full unit, we do not recommend cm au centre, ou 2 par support si 61 cm au centre.
Page 4
Mounting Screws (C) included are intended for WOOD surfaces only; fasteners for other surfaces are not included) Les Vis de l’installation ( C ) a inclus est eu l’intention pour une surface du BOIS seulement; les éléments de fi xation pour les autres surfaces ne sont pas inclus.
Need help?
Do you have a question about the SAFCO E-Z Stor 9200 and is the answer not in the manual?
Questions and answers