Page 1
ASSEMBLY INSTRUCTIONS Accessory Pack Contents SOCCER LEG LEG BOLT WASHER LEG BOOT LEG SHIMS BLACK PLASTIC PLAYER without WEIGHT YELLOW PLASTIC PLAYER without WEIGHT TWO MAN ROD THREE MAN ROD GOALIE MAN ROD (shorter than 3 man) FIVE MAN ROD BLACK RUBBER HANDLE ROD SUPPORT BLOCK (2 ¾...
Page 2
1. Remove all parts and accessories from parts box and check against the enclosed list. 2. Turn the table upside down, taking care not to scratch the top (assemble on carpet or cardboard). 3. The legs may be assembled in two positions depending on the holes used. Installing them to the higher position places the table at regulation height.
Page 4
7. To secure the men, align the holes in each man with the holes in the rod. Using the rod support block under the rod near the man, place the roll pin in the man hole (slot in the roll pin down toward the foot) and tap it through the man with a hammer, until it is flush on both sides 8.
Page 5
Continuously spin the rod while pushing it in and pulling it out of the game. Finally, remove any excess silicone with a clean soft cloth. VISIT WWW.VALLEY-DYNAMOPARTS.COM FOR WARRANTY REGISTRATION AND REPLACEMENT PARTS ORDERS. ENJOY YOUR NEW TORNADO SPORT TABLE.
Need help?
Do you have a question about the Sport and is the answer not in the manual?
Questions and answers