MSE Audio SoundTube IPD-TSB2.0 Install Instructions

MSE Audio SoundTube IPD-TSB2.0 Install Instructions

Dante-enabled soundbar

Advertisement

IPD-TSB2.0
Box Contents
IPD-TSB2.0 Soundbar (x1)
Mounting Brackets (x2)
Mounting Pins (x2)
Thank you for purchasing the SoundTube IPD-TSB2.0
soundbar. This high-de nition 2-channel soundbar provides
outstanding dialogue and clarity along with an open, wide
sound stage.
The IPD-TSB2.0 soundbar speaker is an ultra-thin design
made to t seamlessly under a panel TV. Both table top and
wall mounting options are included with the product. For
on-wall applications, the mounting bracket has adjustments
for lining up and vertically leveling the speaker with the TV.
The soundbar cabinet also has threaded inserts for mounting
the IPD-TSB2.0 to a display wall bracket mechanism.
UL Listed _____________
Warning/Avertissement
SoundTube speakers must be installed by a professional audio installer/contractor. For safety and for
optimum audio performance, installer must follow all directions issued by SoundTube Entertainment.
Les haut-parleurs SoundTube doivent être installés par un installateur audio professionnel ou un
entrepreneur. Pour des raisons de sécurité et de performances audio optimales, l'installateur doit suivre
toutes les instructions émises par SoundTube Entertainment.
by
Install Instructions for:
IPD-TSB2.0 Dante-Enabled Soundbar
© 2020 MSE Audio, and SoundTube Entertainment, Inc. All rights reserved. P# INS-IPD-TSB2.0 | Rev 10.23.2020
Leveling Screws (x2)
Table Top Mounting Feet (x2)
Note: Please check with the display mount manufacturer for
compatibility and ensure the display mount will support a
12-pound soundbar.
Regardless of application, we recommend that you take the
time to read this manual thoroughly before connecting
speakers to network switch or Dante device. In the unlikely
event that you should experience a problem with set-up or
operation, please contact an authorized SoundTube dealer
for assistance, or contact us directly via mseaudio.com or
our tech support line: 800-874-7076.
Do not spec or install speaker near support beam, ventilation duct or
other structure that may interfere with speaker function or dispersion.
N'installez pas à proximité d'une poutre de support, d'un conduit de
ventilation ou d'une autre structure susceptible d'interférer avec la
fonction ou la dispersion des enceintes.
Table Top Feet Screws (x4)
Table Top Mounting Screws (x2)
1.855.663.5600 | www.soundtube.com
Warning/Avertissement

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SoundTube IPD-TSB2.0 and is the answer not in the manual?

Questions and answers

Summary of Contents for MSE Audio SoundTube IPD-TSB2.0

  • Page 1 IPD-TSB2.0 to a display wall bracket mechanism. 1.855.663.5600 | www.soundtube.com UL Listed _____________ © 2020 MSE Audio, and SoundTube Entertainment, Inc. All rights reserved. P# INS-IPD-TSB2.0 | Rev 10.23.2020 Warning/Avertissement Warning/Avertissement SoundTube speakers must be installed by a professional audio installer/contractor. For safety and for Do not spec or install speaker near support beam, ventilation duct or optimum audio performance, installer must follow all directions issued by SoundTube Entertainment.
  • Page 2 Install Instructions for: IPD-TSB2.0 IPD-TSB2.0 Dante-Enabled Soundbar APPLICABLE FOR USA, CANADA OR WHERE APPROVED FOR CAUTION USAGE RISK OF ELECTRIC SHOCK CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE DO NOT OPEN PLUG TO WIDE SLOT, INSERT FULLY. ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE CAUTION: To reduce the risk of electric shock, do not remove cover LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRESE ET POUSSER JUSQU AU FOND.
  • Page 3 Wall/Table Top Mounting Instructions for: IPD-TSB2.0 IPD-TSB2.0 Dante-Enabled Soundbar Step 1. - Choose Location and Run Cable mark on the left side. This will create two marks that are 16” apart and 2.5” below the bottom of your display. (Figure 1) Determine that the desired mounting location is safe and You have now identi ed the location for the two wall brackets clear of any physical obstructions that might hinder the...
  • Page 4: Step 3 - Final Adjustments

    Wall/Table Top Mounting Instructions for: IPD-TSB2.0 IPD-TSB2.0 Dante-Enabled Soundbar Step 2.2 - Table Top Mounting [FIGURE 3] Place the IPD-TSB2.0 face down on a soft clean surface with the grille on. Orient the speaker so the input terminal is on the right hand side.
  • Page 5: Maintenance And Service

    Horizontal Tabletop Stands altered or removed. Should your SoundTube product require service, or you wish to return your product, please call or email the MSE Audio customer service department, or visit mseaudio.com to complete the appropriate request form. All merchandise returned without prior authorization will be refused.

This manual is also suitable for:

644216232208

Table of Contents