Prowise ProLine+ Faq

FAQ ProLine+
The screen does not activate. What should I do now?
Work through the following steps:
● Check whether the LED, located next to the ProLine+ logo, on the front right-hand side of the screen is
on.
● If it is, click here to find out the next steps to take. If not, check, on the left-hand side of the screen,
whether the mains cable is connected properly.
Check whether the power switch, which is also on the right-hand side of the screen, is turned on.
●
● Are you using a Prowise lift? Check whether the lift is connected properly and is in working order.
● If the lift isn't working, try using another electrical outlet or check the electrical outlet for power.
The screen does not come on, but stays black. What should I do?
Work through the following steps:
What colour is the LED, located next to the ProLine+ logo, on the front right-hand side of the screen?
Blue
● Press this button D.MENU on the remote control (black screen).
Does the screen still remain black? Disconnect the screen from the electricity supply by switching off
●
the mains switch on the right-hand side of the screen for at least 5 minutes.
Red
● Make sure that no USB device is connected to the USB port.
● Press the on/off button on the remote control.
Not working? Replace the batteries of the remote control.
●
● Press the on/off button on the right-hand side of the screen.
The sound isn't working, how can I resolve this?
Work through the following steps in Prowise Central:
● Open the Prowise Central menu by placing 5 fingers on the screen for at least two seconds.
Go to the sound menu:
●
● Is the volume level higher than 0?
● Is the mute function switched on?