Sony BRAVIA KDL-40EX640 Operating Instructions Manual page 63

Option Description
Select Small to display minimal channel and program title or select Large to
Info Banner
display detailed channel and program information along with the TV icon if you
are viewing the TV. This information will appear if it is available from the
broadcaster.
Info Banner appears on the screen each time the channel and external inputs
are changed or when DISPLAY on the remote control is pressed.
Clock/Timers Sleep Timer
On Timer
Current Time
Initial Setup If you miss the Initial Setup when you first connected the TV or if you want to
scan all receivable channels, select Initial Setup. Follow the instructions on the
screen. Some settings such as Picture, Sound, and Parental Lock will not be
affected by this Initial Setup. If you wish to return your TV to factory settings,
please see the Troubleshooting section on page 78.
Language Select to display all on-screen settings in your language of choice: English,
Español, Français.
Startup Logo Select On to display the logo when the TV is turned on. Select Off to disable it.
AV Setup Manage Inputs Assigns name to external equipment.
Video1/
Component
Selection
• Favorite channel list will be cleared each time you run the Initial Setup.
• You can assign following labels for each input:
–, Cable, Satellite, VCR, DVD/BD, Home Theater, Game, Camcorder, Digital Camera, PC,
Edit (except PC IN)
–, Edit (for PC IN)
• "–" indicates that no labels are assigned.
• If you select Edit, you can edit video labels. Follow the same steps for Edit Channel Labels on
page 56.
Set the time in minutes (Off, 15, 30, 45, 60, 90, or 120) that you
would like the TV to remain on before shutting off automatically.
Turns on the TV from standby mode at a time you set, and tuned
to a channel or input of your preference. Before setting this
function, make sure you set the correct current Time.
Set the current time manually. This can be set from Initial Setup
or Clock/Timers. Adjust the Current Time for Daylight Saving
Time.
• This TV does not have a battery powered backup for the
clock. Therefore, if there is a power failure or if you disconnect
the power cord, be sure to reset the current date and time.
Select Auto to display names only when the equipment is
connected, or always to display regardless of connection status.
Select Auto to have the TV detect and switch between the
Video 1 or Component when Video 1 or Component is
connected.
(Continued) 63