Advertisement
10
CLEANING AND MAINTENANCE ATTENTION
Air filter net and cooling pad assembly cleaning
If there is too much dust or dirt on the air filter net, the wind effect will be
impacted, therefore, it should be cleaned at least once a month.
1. Take the air filter net out first, then the cooling pad can also be taken out
(as shown below).
2. Use cleanser and banister brush to
clean the air filter net.
3. Dip the cooling pad into cleanser
for several minutes, then rinse and
dry it.
Water tank cleaning
1. Cut off the power and unlock the
water tank knob by rotating the
knob to a horizontal position.,
then take the water tank out.
2. Use a towel to clean the water
tank with cleanser, and then use
water to wash and pour dirty
water out.
Machine body cleaning
1. Turn off the power and unplug the
power cord (be sure to unplug the
power cord when cleaning the
body, or else it may cause electric
shock, fire or other personal
injury).
2. If dust is accumulated on the
surface, please wipe with soft
cloth: if the surface is dirty, mix
warm water and neutral
detergent, wipe with soft cloth
and dry. Avoid washing directly
with water.
3. Do not wash with corrosive
cleanser or solvent. Do not use
gasoline, thinner and any
substance that damages the
surface easily for cleaning.
4. When cleaning, use ordinary
detergent and soft brush. Do not
use chemical agents. Do not use
corrosive detergent or solvent.
5. Make sure the unit is fully dry or
else it may cause electric shock.
Installation after cleaning
1. After cleaning, please ensure that
the Outer Dust Filter, Cooling Pad,
and Water Tank are correctly
installed before using.
2. Link the power and confirm the
machine runs smoothly.
Advertisement
