Advertisement
Quick Links
Poly EduCart 2
Cover
Basket
© 2021 Plantronics, Inc. All rights reserved. Poly, the propeller design, and the Poly logo are trademarks of Plantronics, Inc. The Bluetooth trademark
is owned by Bluetooth SIG, Inc. and any use of the mark by Plantronics, Inc. is under license. All other trademarks are the property of their respective owners.
EagleEye IV Camera
Poles
Base with
Locking Wheels
"Grab"
H Frame
Handles
Back
Flat Screen Display
(Not Supplied - Must meet
Poly's speci cations)
Speakers
Poly G7500
on back side
of H frame
3725-86812-001B
SETUP SHEET
Power supplies
on front side
of H frame
support.polycom.com/video
Advertisement
Summary of Contents for Poly EduCart 2
- Page 1 H frame © 2021 Plantronics, Inc. All rights reserved. Poly, the propeller design, and the Poly logo are trademarks of Plantronics, Inc. The Bluetooth trademark is owned by Bluetooth SIG, Inc. and any use of the mark by Plantronics, Inc. is under license. All other trademarks are the property of their respective owners.
- Page 2 Tighten the screws. rotated to the correct position. Note that spare screws are provided. Poly EduCart 2 Setup Sheet...
- Page 3 Store excess cable with the cable wrap bracket at the bottom of the cart base. Refer to the wiring diagram at the end of this document for details. Only the EduCart 2 components and customer- supplied display should be plugged into the power bar outlet. Do not power any other electrical equipment from this power bar outlet.
- Page 4 (circled in red below) and hand tighten to about half way. The screws must be loose to t onto the cart. For mounting purposes, Poly supplies four long M8 × 25 screws and spacers to use between the H frame and the display.
- Page 5 Place the speaker inside the grill bracket, with the wiring diagram at the end of this document for details. angled edge pointing towards the cart, and fasten to the bracket with two M16-1.0 pan head screws on the rear side. Poly EduCart 2 Setup Sheet...
- Page 6 Tighten the screws. Route the camera cable behind the camera bracket, through the hole, and connect to the camera. Poly EduCart 2 Setup Sheet...
- Page 7 For further information concerning the individual components of this equipment, please refer to the respective product literature. For support or service, please contact your Poly distributor or go to Poly Support at support.polycom.com. Weight: EduCart 2 weight (without display): ~80 lbs (36.3 Kgs)
- Page 8 EduCart 2 Wiring Diagram Poly EduCart 2 Setup Sheet...
Need help?
Do you have a question about the EduCart 2 and is the answer not in the manual?
Questions and answers