Rato RBLM40 Owner's Manual

Rato RBLM40 Owner's Manual

Cordless lawn mower

Advertisement

Quick Links

RATO LITHIUM-ION CORDLESS LAWN MOVER
RBLM40
Owner's Manual
Read all safety rules and instructions carefully before operating this tool

Advertisement

Table of Contents
loading

Summary of Contents for Rato RBLM40

  • Page 1 RATO LITHIUM-ION CORDLESS LAWN MOVER RBLM40 Owner’s Manual Read all safety rules and instructions carefully before operating this tool...
  • Page 2: Table Of Contents

    Original instructions CONTENTS Contents ....................................2 Symbols ....................................3 Safety information .................................. 4 Know your Lawn mower ................................ 9 Assembly Instruction ................................Operation your lawn mower ..............................15 Maintenance ..................................Service……………………………………………………………………………………………………………………………………………………………..….……20 Troubleshooting ..................................Technical data ..................................22 EC- Declaration of Conformity ..............................
  • Page 3: Symbols

    Original instructions SYMBOLS Warning! Read these instructions carefully, be familiar with the controls and the proper use of the machine. Please keep the instructions safe for later use! Explanation of symbols on the machine General hazard safety alert. Read instruction manual. Pay attention that bystanders are not injured through foreign objects thrown from the machine.
  • Page 4: Safety Information

    Original instructions SAFETY INFORMATION GENERAL SAFETY RULES READ ALL INSTRUCTIONS CAREFULLY W A R N I N G This symbol indicates important safety instructions. If these instructions are not followed, it could endanger the personal safety and/or property of the operator and others. Read and understand all instructions in this manual before attempting to operate the mower.
  • Page 5 Original instructions SAFETY INFORMATION hold on to the mower if you are falling. Release the handle immediately. • Never pull the mower back toward you while you are walking. If you must back the mower away from a wall or an obstruction, first look down and behind in order to avoid tripping, and then follow these steps: •...
  • Page 6 Original instructions SAFETY INFORMATION long grass. In this case, do not tilt it more than absolutely necessary and tilt only the part which is away from the operator. Always ensure that both hands are in the operating position before returning the machine to the ground. Switch on the motor according to the instructions with feet well away from rotating parts.
  • Page 7 Original instructions SAFETY INFORMATION • Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately. •...
  • Page 8 Original instructions SAFETY INFORMATION • Do not use a damaged charger. Replace the charger cords or the charger immediately. • Keep the mower and the charger away from water, heat sources (radiators, heaters, stoves, etc.), flames, and chemicals. • Make sure the battery pack is secured in the charger before beginning operation. •...
  • Page 9: Know Your Lawn Mower

    Original instructions KNOW YOUR LAWN MOWER Read this operator's manual and safety rules before operating your lawn mower. Compare the illustration in Figure 1 to your lawn mower in order to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference BAIL START...
  • Page 10: Assembly Instruction

    Original instructions ASSEMBLY INSTRUCTIONS UNPACKING • Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. • Inspect the product carefully to make sure no breakage or damage occurred during shipping. •...
  • Page 11 Original instructions ASSEMBLY INSTRUCTIONS UPPER HANDLELOCK CLOSE OPEN OPEN CLOSE LOWER HANDLE LOCK Fig.2 To lower the handle assembly: • Open the upper handle locks NOTE: If the handle lock is difficult to open, loosen the knobs on the upper handle locks by turning them counterclockwise.
  • Page 12 Original instructions ASSEMBLY INSTRUCTIONS INSTALLING THE WIRE FIXED BUCKLE(see figure 4) • To secure the wire fixed buckle in place. •Make sure the buckle is installed securely. LOWER HANDLE Fig.4 WIRE FIXED BUCKLE INSTALLING THE GRASS CATCHER (FOR REAR BAGGING OPERATION) (see Figure5) •...
  • Page 13 Original instructions ASSEMBLY INSTRUCTIONS TO INSTALL BATTERY PACK (see figure 6) WARNING Always remove battery pack and key from your tool when you are assembling parts, making adjustments, cleaning, or when not in use. Removing battery pack and key will prevent accidental starting that could cause serious personal injury.
  • Page 14 Original instructions ASSEMBLY INSTRUCTIONS TO INSTALL KEY (See Figure 7) • Insert the key into the key hole. KEY HOLE Fig.7 14-English...
  • Page 15: Operation Your Lawn Mower

    Original instructions OPERATING YOUR LAWN MOWER STARTING/STOPPING THE MOWER (see figure 8) • Raise the battery cover. • Install battery pack. • Lower the battery cover. • Insert the key into the key hole. • Press and hold the start button. Pull the bail toward the handle and release the button to start the mower. •...
  • Page 16 Original instructions OPERATING YOUR LAWN MOWER HIGHEST BLADE SETTING BLADE ADJUSTMENT LEVELEVER LOWEST BLADE SETTING Fig.9 EMPTYING THE GRASS CATCHER BAG (See Figure10-11) • Stop the mower and allow blades to completely stop. • Remove key and battery pack. • Lift the rear discharge door. •...
  • Page 17: Maintenance

    Original instructions MAINTENANCE REPLACING THE CUTTING BLADE (See Figure 12-14) W A R N I N G Always protect your hands by wearing heavy gloves and/or wrapping the cutting edges with rags or other materials when performing any maintenance on the blades. ALWAYS remove the key and battery when servicing or transporting the mower.
  • Page 18 Original instructions MAINTENANCE BLADE ADAPTER SLEEVE SHAFT MOTOR ASSEMBLY BLADE POST BLADE ADAPTER SLEEVE BLADE POST BLADE SPACER BLADE SCREW Fig.13 Fig.14 • Replace the blade adapter sleeve and blade on shaft, then replace the blade screw and spacer on the shaft and finger tighten.
  • Page 19 Original instructions MAINTENANCE CLEANING THE MOWER WARNING In order to reduce the risk of electric shock, do not expose the mower to water. The underside of the mower deck should be cleaned after each use, because grass clippings, leaves, dirt, and other debris will accumulate, which will cause rust and corrosion.
  • Page 20: Service

    Original instructions SERVICE • When servicing the mower, use only replacement parts that are available from the manufacturer. In order to obtain replacement parts, The use of parts that do not meet the original equipment specifications may lead to improper performance, and may compromise safety.
  • Page 21: Troubleshooting

    Original instructions TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION The battery is not charged. Charge the battery. The switch is defective. Replace the switch Remove battery; check under deck The mower does not start. for jams. Check the connection Grass jammed at blade. The battery is between the motor connector and not attached to the motor.
  • Page 22: Technical Data

    Sound power level,measured according to ISO22868 ,dB(A) 88.4 ,K=3 Guaranteed sound power level,dB(A) Vibration levels Vibration levels at handles, measured according to ISO 22867, m/s Equipped with cutting blade (original) 1.26,K=1.5 Approved batteries for RBLM40 Battery RBEI40 Type Lithium-ion Battery capacity, Ah Voltage, V Weight, kg 0.69...
  • Page 23: Ec- Declaration Of Conformity

    Original instructions EC- Declaration of Conformity Here with we, Zhejiang Zhongjian Technology Co., Ltd. No.10 Mingyuan South AVE, Economic Development Zone, Yongkang, Zhejiang 321300, China declare that the following Appliance complies with the appropriate basic safety and health requirements of the EC Directives based on its design and type, as brought into circulation by us This declaration relates exclusively to the machinery in the state in which it was placed on the market, and excludes components which are added and/or operations carried out subsequently by the final user.

Table of Contents