Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for BFW Long Island Technology Group Hatteras
- Page 1 Hatteras LED Light Source Operating Manual...
-
Page 3: Table Of Contents
Table of Content Symbol Description ..................2 Warnings and Cautions ................3 Package Content ......................5 Intended Use ....................... 5 Unintended Use ......................5 Operation ....................6 Light Source ......................... 6 Cleaning and Maintenance ................7 Light Source ......................... 7 Specifications ....................8 Electromagnetic Compatibility ..............9 Troubleshooting and Service ..............13 Troubleshooting ...................... -
Page 4: Symbol Description
Symbol Description These important symbols may appear on your Long Island Technology Group Optic light source. Please note their meaning. Attention: Read this owner’s manual for all warnings, precautions and instructions for use. CE marking of conformity indicates this device complies with European Directive 93/42 EC on medical devices and Directive 2002/95/EC on the restriction of the use of certain hazard- ous substances in electrical and electronic equipment. -
Page 5: Warnings And Cautions
Warnings and Cautions Users of this product should be thoroughly trained in the appropriate medical procedures. Also they should read and understand this owner’s manual for this light source and all equipment used with it. DO NOT shine light into eyes. Eye injury may result. DO NOT use in the presence of flammable anesthetics or other flammable mixtures. - Page 6 Warnings and Cautions WARNING Use of this equipment adjacent to or stacked with other equipment should be avoided because it could result in improper operation. If such use is necessary, this equipment and the other equipment should be observed to verify that they are operating normally. WARNING Use only components and accessories listed on page 5 and 8 of this manual.
-
Page 7: Package Content
The device is intended to be used with a fiber optic cable and an optic system. A rotating turret accommodates fiber optic cables from Wolf, Storz, Olympus and ACMI/BFW products. The light is an excellent supplementary light source for examinations and procedure. The advantage of the Hatteras system is that it uses an LED light engine which runs cooler then halogen light engine. -
Page 8: Operation
Operation Light Source 1. Plug AC cable from the AC cable receptacle (A) into a medical grade power supply. 2. Flip the main power switch (B) to the on position. AC Cable Receptacle Main Power Switch DB9 Serial Port- Manufactur- er use only Power Button Dim Button... -
Page 9: Cleaning And Maintenance
Cleaning and Maintenance Light Source 1. Clean the Hatteras with an alcohol wipe. 2. Use a can of compressed air to clean out any dust accumulations. DO NOT pour cleaning solution directly on the surface of the Hatteras DO NOT use any sterilization process or cleaning process using excessive heat or humidity as it will damage the device NEVER immerse the light source in any type of liquid NOTE. -
Page 10: Specifications
Lamp Color Temperature Average 5,700 Kelvin measured at 100% intensity, CRI of at least 70 Output Type Approximately 160,000+ Lux at 14 inches when used with BFW AtoN Headlight Over-Temperature Protection device automatically shuts down to prevent overheating. Fans will remain on during Over-Tem- perature Protection. -
Page 11: Electromagnetic Compatibility
Electromagnetic Compatibility Portable and mobile RF communications equipment can affect medical electrical equipment. Guidance and manufacturer’s declaration-electromagnetic emissions The Hatteras is intended for use in the electromagnetic environment specified below. The customer or the user of the Hatteras should assure that it is used in such an environment Immunity IEC 60601 Test Compliance Level... - Page 12 Electromagnetic Compatibility NOTE 1: At 80 MHz, the separation distance for the higher frequency range applies. NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from surfaces, objects, and people. (1) Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, am- ateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically with accuracy to asses the electromag- netic environment due to fixed RF transmitters, an electromagnetic site survey should be considered.
- Page 13 Electromagnetic Compatibility Guidance and manufacturer’s declaration - electromagnetic immunity The Hatteras is intended for use in the electromagnetic environment specified below. The customer or the end user of the Hatter- should assure that it is used in such an environment. Immunity test IEC 60601 test level Compliance level...
- Page 14 Electromagnetic Capability Guidance and manufacturer’s declaration - Electromagnetic Emissions The Hatteras is intended for use in the electromagnetic environment specified below. The customer or the end user of the Hatter- should assure that it is used in such an environment. Emissions Test IEC 60601 test level Compliance level...
-
Page 15: Troubleshooting And Service
Troubleshooting and Service Troubleshooting Symptom Possible Issue Solution Main power cord not plugged into Plug in cord socket Return Hatteras to manufacturer Fuse is blown for service No Power Main power switch is not fully Toggle ON/OFF switch engaged Internal component is not func- Return Hatteras to manufacturer tioning... -
Page 16: Warranty And Service
Troubleshooting and Service Warranty and Service Warranty against manufacturer’s defects applies to the following components of the Hatteras™ under normal use for one (1) year from the date of sale from Long Island Technology Group (includes parts and labor). • LED Optics and Controller •... - Page 17 Scan Here to See All Long Island Technology Group Manuals Or Visit: http://www.litgp.com/manuals Contents are fragile, Handle with care. Conforms to: IEC 60601-1 Edition 3, IEC 60601-1-2 Edition 4, IEC 60601-2-18 Edition 3 60 Carolyn Blvd, Farmingdale NY 11735 AAMI ES60601-1 Edition 1, CSA C22.2 NO 60601-1:08 Edition 2 (631) 270-4463 litgp.com Manufactured by Long Island Technology Group, LLC Revision 3.4...
Need help?
Do you have a question about the Long Island Technology Group Hatteras and is the answer not in the manual?
Questions and answers