Download Print this page

Elpas 5-WTD41400-0 User Manual

Personal safety bracelet

Advertisement

Quick Links

Elpas Personal Safety Bracelet – Tamper Band and
Green Button
P/Ns: 5-WTD41400-0 (green button), 5-WTD41402-0 (green button, tamper band), & 5-WTD41102-0 (tamper band)
Introduction
The Personal Safety Bracelet is a wrist worn Active RFID Tag that provides around-the-
clock monitoring of medical patients and assisted living care residents who require added
safety.
The bracelet bundles triple-tech Real-Time Location System (RTLS) technologies to
deliver precise real-time positioning data so that a host RTLS safety application or an
integrated physical security platform can track the whereabouts of the individual
anywhere within the facility.
The bracelet features a large duress call button designed especially for senior citizens.
Pressing the button causes the tag to transmit positioning data that identifies the person
requiring assistance and the precise building location of the involving medical or safety
incident for speedier and more effective response efforts.
The bracelet enables immediate near-exit location awareness for administering patient/staff
escort procedures and for preventing unauthorized transfers into or out of protected
building areas.
Product Specifications
RT LS T echnologies
RF (433MHz) ; IR (800nm) ; LF Reception (125KHz)
RF (Motion/Stationa ry)
Supervision messages every 10 seconds / 60 seconds
IR ( Motion/ Stationary)
Supervision messages every 10 seconds / 60 seconds
Supe rvised Events
LF Entry/Exit: Button Press/Release, Motion/Stationary, Low Battery
Entry into LF: 3 transmissions (each @ 2ms in duration), 0.5secs apart; every 2 seconds.
RF Under LF
After 10 minutes under LF: Returns to 10 seconds while in motion
Power So urce
3.0V/560mAH lithium battery, CR 2450
Battery Life
12-36 months depending upon usage
LED Indicator
Low Battery (flashes every ten sec when below 2.6 Volts), Button Press (flashes three times), LF Field (flashes three times)
T ag & LF ID Codes
Factory-Programmed
Housing
IP65, Nylon Plastic
Weight
41.1 grams (1.45 ounces)
Dime nsions (H x W x D)
46.9 x 41.0 x16.8mm (1.84 x 1.61 x 0.65 inches)
Temp: -30°C to 70° C (-22°F to 158°F)
Operating Envi ronment
Humidity: 100% non-condensing
Ma nagement Software
Eiris 4.6 (or higher) ; Eiris 4.9 (or higher) for Mother Bracelet)
Regulatory
CE, FCC, IC compliant
Warrant y
1 year limited warranty (excluding battery)
Product offerings and specifications are subject to change without notice.
Not all products include all features.
Accessories
Part Number
Description
5-PBA90003
3.0V/560mAH lithium battery, CR 2450 (20 pcs)
5-WT D09001
Standard Wristband (set of 5)
5-WT D09003
Hospital Band Adapters (set of 5)
*5-PB063011
Disposable Clincher Wristband (set of 50)
*5-WT A90007
Reusable Medical Grade Wristband with Lock Pin (5 pcs)
5-500130
Lock Pin Removal Magnet
5-WT D09012
Tamper Wristband (set of 5). To insert, remove band adapters
5-WT D09009
Tamper Lock Key (set of 5)
5-BT E00433-1
Elpas Infant Protection Charm
*Requires Hospital Band Adapters for use with Bracelet P/Ns 5-WTD40000-0 & 5-WTD41000-0.
www.elpas.com
User Guide
Page 1 of 4
V3/Nov 2014

Advertisement

loading
Need help?

Need help?

Do you have a question about the 5-WTD41400-0 and is the answer not in the manual?

Questions and answers

Summary of Contents for Elpas 5-WTD41400-0

  • Page 1 Elpas Personal Safety Bracelet – Tamper Band and User Guide Green Button P/Ns: 5-WTD41400-0 (green button), 5-WTD41402-0 (green button, tamper band), & 5-WTD41102-0 (tamper band) Introduction The Personal Safety Bracelet is a wrist worn Active RFID Tag that provides around-the- clock monitoring of medical patients and assisted living care residents who require added safety.
  • Page 2 Elpas Personal Safety Bracelet – User Guide Regular Band Initial Activation Battery Replacement The bracelet is shipped from the factory in Sleep Mode to Change the bracelet’s status in the host conserve battery power during shipping. RTLS application to ‘Inactive’.
  • Page 3 Elpas Personal Safety Bracelet – User Guide Attaching the Conductive Band Tamper Lock Usage Place the bracelet on the wrist of protected user as you would Place the bracelet back cover side up. Then unscrew the 4 any normal wrist watch.
  • Page 4 Elpas Personal Safety Bracelet – User Guide Compliance with Standards C e t é q u i p e m e n t a é t é t e s t é e t j u g é c o n f o r m e a u x l i m i t e s s ’ a p p l i q u a n t à u n a p p a r e i l T h i s d e v i c e c o m p l i e s wi t h F C C R u l e s P a r t 1 5 a n d wi t h I n d u st r y C a n a d a l i c e n s e e x e m p t R S S st a n d a r d ( s) .

This manual is also suitable for:

5-wtd41402-05-wtd41102-0