North Light Zinc Christmas Star Quick Start Manual

Zinc Christmas Star
Please read the entire instruction manual before using the product
and then save it for future reference. We reserve the right for
any errors in text or images and any necessary changes made
to technical data. In the event of technical problems or other
queries, please contact our Customer Services.

Assembly

1. Attach the metal
ring to the holder
so that the stay
on the ring points
towards the cable
holder.
2. Remove the backing
tape from the LED
strip.
3. Attach the LED strip
to the metal ring,
starting at the stay
and laying the strip
around the outside
of the ring so that
the ends meet at
the stay.
GREAT BRITAIN • CUSTOMER SERVICE
tel. 0845 300 9799 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk
Art.no 36-5685
4. Fasten the LED strip
using the included
cable ties.
5. Use the included
strain relief and
screws and attach
the power lead to
the bracket as shown
in the picture below.
6. Align the front and
back pieces of
the star and screw
the points of the star
securely together
using the included
screws and nuts.
7. Hang the star up using the included
chain or stand it on feet (sold separately,
art.no: 36-5795). When hanging, use
the chain's two end hooks to hook into
the star and the thicker centre hook to
hook onto an appropriate fastener, e.g.
a screw-hook or similar. (The two smaller
end hooks can be bent open a little in order
to make them fit into the holes in the star).
Model 6301
8. Plug the power cable of the
LED strip into the mains
adapter (it only fits one way)
and tighten the connection by
screwing on the lock nut.
9. Connect the mains adaptor to a wall socket.

Care and maintenance

• Clean the product using a lightly moistened cloth. Use only
mild cleaning agents, never solvents or corrosive chemicals.
• If the star is used outside, it should always be taken inside
when it not in use.
• The star should be stored in a dry place out of the reach
of children.

Disposal

This product should be disposed of in accordance with local
regulations. If you are unsure how to proceed, contact your
local council.

Specifications

Power supply 230 V AC, 50 Hz
Cable length 6 m
Diameter 80 cm
ENGLISH