Lenovo ZA6G0006US User Manual page 11

3. Swipe left for the next item (photo, artwork), swipe right for the previous item (photo, artwork).
Channel transition
1. Open the app, enter the Device home screen .
2. Go to > Motion Control, the Motion Control switch is set to on by default and needs be turned
off to disable the gesture for your Smart Frame device.
3. Swipe up for the next channel.
Motion sensor failure
The motion sensor cannot work properly under the below conditions:
The light in the room is too bright, such as direct sunlight shining on the frame.
The frame is put on a table and the gesture sensor is close to the table surface.
Hand movement is not horizontally level with the motion sensor position.
Note: We suggest you stand closer to the frame and wait until the keys on the frame light up
before starting a motion command.