Download Print this page
Vogue 360172 Installation Instructions & User Manual

Vogue 360172 Installation Instructions & User Manual

Advertisement

Quick Links

Washing Machine And Dryer All In One
10kg Front Loading Vogue
360172/360173

Advertisement

loading

Summary of Contents for Vogue 360172

  • Page 1 Washing Machine And Dryer All In One 10kg Front Loading Vogue 360172/360173...
  • Page 2 washer-dryer Troubleshooting guide...
  • Page 3: Safety Notices

    Safety Notices Safety Notices Before Use Before Use Turn off the tap if the machine is to be left any length of time (e.g.holiday),especially if there is no floor WARNING drain(gully) in the immediate vicinity. Take care to ensure that foreign objects(e.g.nails,pins,coins,paper clips) do not find their way into the Read and understand thoroughly these safty instructions before use.
  • Page 4: Installation

    Installation Parts and features Before Use Before Use Level adjustment The drawing of machine in the manual is only use for instruction. The machine must stand perfectly level on all four feet to ensure It may be vary from the model you buy. safe and proper operation.Incorrect installation may increase Backout packing electricity and water comsuption and may cause the machine to...
  • Page 5: Functions Of The Control Panel

    Installation Use process Water inlet connection Connect the inlet hose supplied with the machine to a tap with a 3/4" thread. Do not use previously employed hoses. Installation should comply with local water authority and building regulations ‘ requirements. Connect a water supply to the inlet valve at back of the machine.Follow the indication of the picture below to complete the connection.
  • Page 6 Note: 1.These kinds of clothes should not be used for the dry program: clothes Main wash compartment 1. Open the drawer and add adequate detergent into main wash has the logo “ ”,woollen clothes, silk, clothes contains leather or foam Fabric softener compartment compartment marked “...
  • Page 7 Important: If the machine is exposed to temperatures below 0°C, certain precautions When the machine is started, the door lock is locked though you press the “Start/Pause” button. should be taken. Press the “power” button to switch off the machine and the door lock is unlocked in two minutes. 1.
  • Page 8 There is a “E06” is on the Modle tube and wire is not secure. it is secure. heating tube screen. 360172/360173 Parameter 2. The heating tube is damaged. 2. Change the heating tube. fault. 1. The connection between the wire...

This manual is also suitable for:

360173