ASROCK Z590 Pro4 Manual page 35

Z590 Pro4
Step 4
Prepare the M.2 standoff that comes
with the package. Then hand tighten
the standoff into the desired nut
location on the motherboard. Align
B A
and gently insert the M.2 (NGFF)
SSD module into the M.2 slot. Please
be aware that the M.2 (NGFF) SSD
module only fits in one orientation.
B A
20 o
Step 5
Tighten the screw that comes with
the package with a screwdriver to
secure the module into place.
NUT2 NUT1
B
2
Step 6
1
Tighten the screw with a screwdriver
to secure the module and M.2
heatsink into place. Please do
2
not overtighten the screw as this
might damage the module and M.2
heatsink.
31