Advertisement
Quick Links
Advertisement
Summary of Contents for CPVan CP-WG01W
- Page 1 Range 0~100%LEL Wi-Fi Gas Leak Detector User Guide...
- Page 2 Introduction This product is designed to detect explosive gases(natural gas and LPG) in the air for houses, offices and similar places etc. In case of gas leak, it alarms sound with voice prompt, push text notification to your mobile and drives the valve/manipulator to turn gas leak source off.
-
Page 3: Specifications
Specifications Power supply Micro USB+5V/1A Consumption <200mA Detecting gas Natural gas(CH4), LPG Temperature：-10~55℃ Working Environment Humidity：<95%RH ( non-condensing ) Sample Diffusion Range 0~100%LEL Alarm setting value 6%LEL Tolerance ±3%LEL Response time ≦30 seconds 57℃ Heat alarm value ≧ 70dB Alarm volume Indicator, sound, voice prompt and APP Alarm with notification push... - Page 4 In the box Gas leak detector x1 Power adapter x1 Mounting adhesive tap x1 Screws x2 User guide x1 At a glance Red alarm Green power indicator indicator Yellow fault Yellow life indicator indicator Display screen USB+5V power port Wi-Fi configuration/ Clock adjustment/ Test/Silence button...
- Page 5 Middle socket is for manipulator Right socket is for valve control Bracket Indicators Indicator What you see What it means Green Power is ok Power Blinking red Gas leak or heat alarm Alarm Blinking yellow Sensor is fault Fault Life Blinking yellow Sensor life is over...
- Page 6 Scan the QR code or find “Smart Life” from GooglePlay/APP Store to get the free application for Android or iOS. Upon installation of APP on your phone, the app will guide you through registering, connecting the detector to the internet. Add your detector Smartlink(EZ) mode Tap Add Device or “+”, select Security &...
-
Page 7: Installation
Installation Do not install the detector Where the temperature is under 0℃ and over +55℃ or outdoor Near to exhaust fan, vaporous, chimney hood, smelly places Location of the detector should not be very close to apertures and ... - Page 8 Installation Using screws Screw the bracket to the ceiling or wall with the included screws.Holding your detector against the bracket and turn it clockwise to fix it in the bracket. Using adhesive tap Tear off one side of the double-sides adhesive tap and stick it to the underside of detector, tear off the other side and attach detector to a flat surface.
- Page 9 Usage Warm-up After power on, the detector will warm-up within 180 second and screen says “Waiting” with countdown ticking sound. Working The screen displays the working window and clock panel per 1 minute in turn. Wi-Fi icon Connected to network with dot. ...
- Page 10 Gas leak alarm When a gas leak is detected,the level ring is displayed and “There is a gas leak. Check now”is heard. When gas leak level raises continuously and preset level is reached, the detector alarms sound, the red alarm indicator flashes, you hears “Emergency.
-
Page 11: Clock Adjustment
If sensor is fault In case of sensor fault， the yellow fault indicator flashes and “Fault”is displayed on the screen. Testing Without alarm, click the button or tap in APP to test the detector. The screen says “Ready for test”and you hears “This is a mere test.We'll alarm a sound.The alarm is loud.The test starts”The detector starts to test low level gas leak, high level gas leak alarm, heat alarm and valve/manipulator control. -
Page 12: Considerations And Warnings
Considerations and Warnings Vapor of alcohol and similar substances, spray, very intense cigarette smoke, torch gas, cleaning agents and chemical substances with very strong odors, very intense meal and water vapors may cause to alarm to malfunction by misleading the apparatus. This product is only used to reduce the accident, cannot make sure everything.
Need help?
Do you have a question about the CP-WG01W and is the answer not in the manual?
Questions and answers