Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Zeny H03-1020A
- Page 1 PORTABLE WASHING MACHINE USER MANUAL Model H03-1020A...
- Page 2 Portable Washing Machine Model H03-1020A INDEX S.No. Particulars Page No. MAIN PARTS CIRCUIT DIAGRAM OPERATING INSTRUCTIONS RECOMMENDED WASH OPERATION CHART WASHING POWDER (DETERGENT) WOOLEN FABRIC AND BLANKET WASH CYCLE PROCEDURE RINSE CYCLE PROCEDURE SPIN CYCLE PROCEDURE IMPORTANT SAFETY PRECAUTIONS MAINTENANCE REMARK Please read the instruction manual carefully prior to first use.
- Page 3 MAIN PARTS Attention: This appliance should not be exposed to rain or placed in damp/wet place. Make sure the appliance is plugged into a well-grounded outlet. Use the appliance in a single socket as it is not recommended to use extension cords or power strips together with other electrical appliances.
- Page 4 CIRCUIT DIAGRAM WARNING: to reduce the risk of fire or electric shock, only authorized personnel should perform repairs. OPERATING INSTRUCTIONS Operating Preparation: 1. The AC outlet must be grounded. 2. Lay down the drain pipe (discharge tube) to assure good discharging. 3.
- Page 5 WOOLEN FABRICS AND BLANKETS It is not recommend to wash pure woolen fabrics, woolen blankets and/or electric blankets in the machine. Woolen fabrics may be damaged, may become too heavy during operation and therefore are not suitable for the machine. WASH CYCLE OPERATION 1.
- Page 6 IMPORTANT SAFETY PRECAUTIONS Close supervision is necessary when any appliance is used by or near children. Be sure to unplug the appliance from AC outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning appliance. Do not operate any appliance with a damaged part, has malfunctioned or has been damaged in any manner.
Need help?
Do you have a question about the H03-1020A and is the answer not in the manual?
Questions and answers
whats the gound wire color and whats the positve wire color?
Water linkage at the hose connector
Are the pullys available to replace old ones