Page 2
The adjustments have to be done equally on both sides. The adjustment is correct when only 1 sheet will feed through at one time. Geelseweg, 80 | 2250 | Olen | BELGIUM | Tel. +32 (0) 14 25 92 83 | henry.dumor@hotmail.com | www.dumor.be...
Page 3
Depending on mode selected by button nr 2: #3 + key (22) Selects to start the machine / move the sheet forward / increase a value. Geelseweg, 80 | 2250 | Olen | BELGIUM | Tel. +32 (0) 14 25 92 83 | henry.dumor@hotmail.com | www.dumor.be...
Page 4
- First measure the card and the cross waste lengths. - Usually they will be spot on if not reset the cut length fractionally using button nr 2. Geelseweg, 80 | 2250 | Olen | BELGIUM | Tel. +32 (0) 14 25 92 83 | henry.dumor@hotmail.com | www.dumor.be...
Page 5
If you use the left arrow the jam will get worse and the drive belt may snap (no warranty). Copyright Dumor International 2106 Geelseweg, 80 | 2250 | Olen | BELGIUM | Tel. +32 (0) 14 25 92 83 | henry.dumor@hotmail.com | www.dumor.be...
Need help?
Do you have a question about the EASYCARD A4+ and is the answer not in the manual?
Questions and answers