Philips FW-P88 Manual page 9

All manuals and user guides at all-guides.com
9
CAUTION:
– For optimal sound performance, it is
recommended to use the supplied
speakers.
– Do not connect more than one speaker
to any one pair of +/- speaker
terminal.
– Do not connect speakers with
impedance lower than the speakers
supplied. Please refer to
SPECIFICATION section of this manual.
D Rear Surround
Speakers' Connection
Connect the black (non-marked) wires
to the black REAR SURROUND
terminals and the colored (marked)
wires to the grey REAR SURROUND
terminals.
E Center Speaker
Connection
Connect the black (non-marked) wires
to the black CENTER terminal and the
blue (marked wires) to the blue
CENTER terminal.
pg 01-28/P88/37-Eng 9
PREPARATION
F Line Out Connection H Subwoofer Out
(wireless ready)
You can connect the audio left and right Connect the optional active subwoofer
LINE OUT terminals to a optional CD to the SUBWOOFER OUT terminal.
Recorder ANALOG IN terminals. This The subwoofer reproduces just the low
allows you to record in an analogue bass sound effect (e.g. explosions, the
format. rumble of spaceships, etc.). Be sure to
follow the instructions supplied with the
You can also install additional optional
subwoofer.
front active speakers away from the
system (e.g. in another room) to reduce
I Wireless Surround Out
the inconvenience of running long
speaker wires across rooms. You can
place as many remote speakers as you
You may connect transmitter unit of the
like provided they operate at the same
wireless rear speakers (not supplied) to
radio frequency. Connect the wireless
the SURROUND OUT terminal.
radio frequency transmitter to the LINE
Note:
OUT terminals. Place the active
– Availability of wireless transmitter and
speakers at your preferred location. Be
its peripherals are subjected to the
sure to follow the instructions supplied
approval of local authorities. Please
with the active speakers.
check with respective local safety or
approving authority.
G Connecting other
equipment to your
J Digital Out Connection
system
You can record the digital sound from
You can connect the audio left and right
the CD, through this output, on any
OUT terminals of a TV, VCR, Laser Disc
audio equipment with digital input (e.g.
player, DVD player or CD Recorder to
CD Recorder, Digital Audio Tape (DAT)
the AUX/CDR IN terminals at the rear
deck, Digital to Analog Converter and
of the system.
Digital Signal Processor).
Connect one end of the cinch cable
(not supplied) to the DIGITAL OUT
socket and the other end to the audio
equipment with digital input.When
connecting the cinch cable, make sure it
Connection
is fully inserted.
K AC Power Supply
After all other connections have been
made, connect the AC power cord to
the system and to the wall outlet.
Inserting batteries into the
Remote Control
Connection
• Insert the batteries (Type R06 or
AA) into the remote control as
shown in the battery compartment.
• To avoid damage from possible
battery leakage, remove dead
batteries or batteries that will not be
used for a long time. For
replacement, use type R06 or AA
batteries.
2/16/00, 9:12 AM
3139 116 19711 (ENG)