Table of Contents Warnings………………………………………………………………….2 Tools and Hardware……………………………………………………..3 Parts List……………..…………………………………………………...4 Assembly Instructions………………………………………………..5-10 Care and Maintenance……………………………………………..11 Warranty Information………………………………………....11 Note: Before beginning assembly of product, make sure all parts are present. Compare parts with package content list, hardware, and parts list on page 3 & 4. If any part is missing or damaged do not attempt to assemble the unit.
Warnings • Assemble the Gazebo on a soft, non-abrasive surface such as grass to avoid damage. • This product is not intended for use during inclement or severe weather, that includes but is not limited to rain, hail, sleet, snow, wind, freezing conditions and extreme heat. •...
Parts List Support post 1 Support post 2 Support post 3 Panel 1 Panel 2 Upper canopy corner pole Bar counter top Center support hub U-shaped bracket Bottle opener Cap plate Post base Small canopy Large canopy Bar hook Top hook Page 4 of 11...
Assembly Instructions Step 1: 1) Attach U-shaped bracket (I) to the top of Support post 1 (A) using Upper tube bolt (T). Repeat this step for Support post 2 (B) and Support post 3 (C). So that all posts have an attached U-shaped bracket.
Page 7
Assembly Instructions Step 3: Insert the Panel 1 (D) into Support post 1 (A) and Support post 3 (C), then secure the Support post 1 (A) , Support post 3 (C) and Panel 1 (D) using 2 X M6 * 20mm Wing bolts (R). Step 4: Insert the Panel 2 (E) into Support post 1 (A) and Support post 2 (B), then...
Page 8
Assembly Instructions Step 5: Attach the Bar hooks (O) to Bar counter top (G) using 12 X Self-tapping screws (Q) for both sides of Bar counter top (G) . Step 6: 1) Insert Bar counter tops (G) into Support post 1 (A) and Support post 2 (B).
Page 9
Assembly Instructions Step 7: 1) Insert Upper canopy corner poles (F) into the Center support hub (H). 2) Screw the Top hook (P) into the Center support hub (H). Step 8: Place large canopy (N) onto the assembled Upper canopy corner pole (F). Page 8 of 11...
Page 10
Assembly Instructions Step 9: Place the small canopy (M) onto the assembled Upper canopy corner pole (F) and then attach the four corners of small canopy (M) to Upper canopy corner pole(F) gently. Step 10: Attach four corners of assembled Upper canopy corner pole (F) and U-shaped bracket (I) using 4 X M6 * 30mm Wing bolt and nuts (S).
Page 11
Assembly Instructions Step 11: 1) Attach the four corners of large canopy (N) to Upper canopy corner pole (F) gently. 2) Move the Cap plate (K) above the hole of Support post 1 (A), then insert Gazebo anchor kits(U) into the holes of Post base (L). Repeat above step for Support post 2 (B) and Support post 3 (C).
Care and Maintenance • For best results, clean the frame with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that may accumulate. • Do not use abrasive materials or cleaners. • In order to prolong the use of the product, do not use during inclement weather (rain, hail, sleet, snow, wind, fire, extreme heat and freezing conditions).
Need help?
Do you have a question about the FSMVPT3009 and is the answer not in the manual?
Questions and answers