Average Factor Calculation And Transmitter On Time Measurements - Intertek MBU 400 Manual

Company: RTX Consumer Products Hong Kong Ltd.
Model: MBU 400
4.9.4 Average Factor Calculation and Transmitter ON Time Measurements, FCC Rule
15.35(b), (c)
[ ]
The EUT antenna output port was connected to the input of the spectrum
analyzer. The analyzer center frequency was set to EUT RF channel carrier.
The SPAN function on the analyzer was set to ZERO. The transmitter ON time
was determined from the resultant time-amplitude display:
Please refer to the attached plots for more details:
Plot 5A: Transmitter ON Time Measurements (Traffic Carrier)
Plot 5B: Transmitter ON Time Measurements (Dummy Carrier)
The plots of Transmitter ON Time Measurements are saved as filename:
txon.pdf
[ ×
Please refer to the attached transmitter timing diagram that are provided by
]
manufacturer
[ × ]
Not applicable - No average factor is required.
×
Please refer to Exhibit 2.2 Technical Description for more details
[ ]
Test Report Number: HK08060834-1
FCC ID: T7HCT8015
INTERTEK TESTING SERVICES
Date of Test: June 24-July 7, 2008
Page 33 of 72