Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2020 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
20l
57208
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for HAUL MASTER 57208
- Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. Visit our website at: http://www.harborfreight.com 57208 Email our technical support at: productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged.
-
Page 2: Important Safety Information
Larger loads need to be transported more slowly and secured more carefully. SAVE THESE INSTRUCTIONS. Specifications Load Capacity 800 lb Dimensions 70-1/8″ L x 13-13/16″ W x 34" H Weight 42.5 lb Page 2 For technical questions, please call 1-888-866-5797. Item 57208... -
Page 3: General Assembly
M10 Lock Nut x8 PART NUMBER 17 PART NUMBER 18 PART NUMBER 19 Spring Washer x8 Flat Washer x8 Lock Washer x4 PART NUMBER 20 PART NUMBER 21 PART NUMBER 22 Item 57208 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Crossbar Assembly
3. Insert a Left and Right Upright Assembly into the Crossbar (8). 4. Repeat step 3 for the remaining Correctly Left Crossbar and Left and Right Finished Upright Upright Assemblies. Assembly Assembly Page 4 For technical questions, please call 1-888-866-5797. Item 57208... -
Page 5: Truck Installation
4. Install two Clamp Assemblies on each Rail Mount. Position the Clamps at least 4" apart. Foam Anti-Scratch Vehicle Bed Rail Installed Crossbar Assembly C-Clamp Clamp Foot M10 x 7 5 Bolt Item 57208 For technical questions, please call 1-888-866-5797. Page 5... - Page 6 5. Double check all screws and bolts for tightness before use. End Cap Lock Knob Lock Washer Load Bracket St 4 .8 x 1 6 M10 Square Nut Screw Crossbar Page 6 For technical questions, please call 1-888-866-5797. Item 57208...
-
Page 7: Maintenance And Servicing
Truck Rack with clean cloth. • loose hardware • misalignment or binding of moving parts • cracked or broken parts • any other condition that may affect its safe operation. Item 57208 For technical questions, please call 1-888-866-5797. Page 7... -
Page 8: Please Read The Following Carefully
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Page 8 For technical questions, please call 1-888-866-5797. Item 57208... - Page 9 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 792363572088 when ordering parts. Item 57208 For technical questions, please call 1-888-866-5797. Page 9...
-
Page 10: Parts List And Diagram
M10 Nut Upper Bracket M10 Lock Nut Cross Bar 10 Spring Washer End Cap 10 Flat Washer Load Bracket 10 Lock Washer Clamp Foot Foam Pad M10 Square Nut Thread Glue Page 10 For technical questions, please call 1-888-866-5797. Item 57208... -
Page 11: Assembly Diagram
Assembly Diagram Item 57208 For technical questions, please call 1-888-866-5797. Page 11... -
Page 12: Limited 90-Day Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 57208 and is the answer not in the manual?
Questions and answers