SCA CLM36LD Instruction Manual

SCA CLM36LD Instruction Manual

2x18v cordless lawn mower

Advertisement

Quick Links

SCA
2X18V CORDLESS LAWN MOWER
Instruction Manual
Important
- Please read these instructions fully before operating or maintaining your Lawn Mower.
These instructions contain important information that will help you get the best from your Lawn
Mower, ensuring it remains safe to operate.
If you need help or have damaged or missing parts, call the Customer Helpline on 1300 889 028
After Sales Support
FREE CALL 1300 889 028
EMAIL:salesau@positecgroup.com
CLM36LD

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CLM36LD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SCA CLM36LD

  • Page 1 2X18V CORDLESS LAWN MOWER CLM36LD Instruction Manual After Sales Support FREE CALL 1300 889 028 EMAIL:salesau@positecgroup.com Important - Please read these instructions fully before operating or maintaining your Lawn Mower. These instructions contain important information that will help you get the best from your Lawn Mower, ensuring it remains safe to operate.
  • Page 2: Table Of Contents

    Contents Safety Information.....................3 In The Box........................8 Accessories.......................9 Assembly......................9 Before Putting Into Operation..................13 Operating Instructions..................... 14 Maintenance......................16 Troubleshooting.....................19 Technical Data......................21 Warranty......................22 Customer Helpline 1300 889 028...
  • Page 3: Safety Information

    Safety Information Important - Please read these instructions fully before starting assembly Warning Symbols To reduce the risk of injury, Read the operator’s manual user must read instruction manual T 2A Fuse Read instruction handbook before operation this machine Positive terminal Negative terminal Keep bystanders away Double insulation...
  • Page 4 Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings PRODUCT SAFETY WARNING! Read all safety warnings and all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Carefully read the instructions for the safe operation of the machine.
  • Page 5 Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings f) Exercise extreme caution when changing direction on slopes. g) Do not mow excessively steep slopes. h) Use extreme caution when reversing or pulling the lawn mower towards you. i) stop the blade(s) if the lawn mower has to be tilted for transportation when crossing surfaces other than grass, and when transporting the lawnmower to and from the area to be mowed.
  • Page 6 Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings SAFETY WARNINGS FOR BATTERY PACK a) Do not dismantle, open or shred cells or battery pack. b) Do not short-circuit a battery pack. Do not store battery packs haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by conductive materials.
  • Page 7 Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings GENERAL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
  • Page 8: In The Box

    In The Box Parts Safety key Lower handle locking lever Upper handle Safety flap Lower handle Upper handle locking lever Grip handle for grass collection bag Cable clip Grass collection bag Switch lever Cutting height adjusting lever Battery pack (See Fig. D) Wheel Battery charger (See Fig.
  • Page 9: Accessories

    Accessories Grass collection bag Battery pack Charger Assembly NOTE: Before using the tool, read the instruction book carefully. ASSEMBLY WARNING! Before you assemble the lawn mower, check the accessories according above information, make sure the accessories are completed. 1. FITTING THE HANDLE 1) Insert the lower handle into the slot on the deck.
  • Page 10 Assembly 7) Repeat the same steps to the other side of the upper handle. Check that the handles are FULLY secured. 8) Attach the cable clips provided to the upper and lower handle. Insert the cable into the clips to fasten the cable to the handle, ensuring there is enough cable slack. (See Fig.
  • Page 11 Assembly 2. GRASS COLLECTION BAG ASSEMBLY Connect the grass box handle to the box top as shown in Fig. B1-B4. 1) Align the front and back parts of the handle with the front and rear slots on the grass collection box. (See Fig. B1) 2) Press the front of the handle briefly.
  • Page 12 Assembly 4. REMOVING/EMPTYING THE GRASS COLLECTION BAG Hold the grass collection bag, lift the safety flap and hold up. Remove grass collection bag. WARNING: Always check the safety flap can close the discharge outlet tightly before using. Never lift the safety flap when the lawn mower is being used without fitted grass collection bag.
  • Page 13: Before Putting Into Operation

    Before Putting Into Operation 1. CHARGING THE BATTERY PACK CHARGER (SEE FIG. D) NOTE: a) Do not use any charger other than that specifically provided for use with the equipment. b) If the battery pack is very hot you must remove your battery pack from the charger and allow time for the battery to cool down before recharging.
  • Page 14: Operating Instructions

    Operation Instruction 1. STARTING/STOPPING (SEE FIG. F1, F2) STARTING 1) Insert the safety key into the motor switch on the handle. 2) Push the key inwards and hold it in position. Pull the switch lever towards the handle and the mower will start. 3) Release the safety key while holding the switch lever.
  • Page 15 Operation Instruction 3. GRASS BAG FILLING INDICATOR (SEE FIG. H) To remind you immediately to empty when the grass collection bag is full, the mower provides an indicator on the top of bag to show the collection status. And you can follow as shown in the figure.
  • Page 16: Maintenance

    Maintenance WARNING: Stop the mower before removing the grass bag. NOTE: To ensure long and reliable service, perform the following maintenance procedures regularly. Check for obvious defects such as a loose, dislodged or a damaged blade, loose fittings, and worn or damaged components. Check that the covers and guards are all undamaged and are correctly attached to mower.
  • Page 17 Maintenance BLADE MAINTENANCE (See Fig. K1, K2) Renew your metal blade after 50 hours mowing or 2 years, whichever is the sooner- regardless of condition. Follow these procedures to remove and replace the blade. You will need garden gloves (not provided) and a spanner wrench (not provided) to remove the blade. Hold the blade and unscrew the blade bolt counter-clockwise using a spanner wrench, and then remove blade.
  • Page 18 Maintenance STORAGE (SEE FIG. L1, L2) WARNING: If the appliance is accessible to children and unauthorized persons during storage, this can result in injury. Store the appliance out of the reach of children and unauthorised persons. CAUTION: Store the battery packs in cool and dry conditions, but not exposed to naked flames or heat sources.
  • Page 19: Troubleshooting

    Troubleshooting The following table gives checks and actions that you can perform if your machine does not operate correctly. If these do not identify/remedy the problem, contact your service agent. WARNING: Switch off and remove the battery packs before investigating fault. Symptom Remedy A.
  • Page 20 Troubleshooting Symptom Remedy 6. Battery charger A. Check plug connection. LED’s not on. B. Replace charger. 7. Battery charger LED A. Battery needs to be diagnosed. Take to authorized service does not flip to green. center. A. Chute clogged. Release Switch Lever to turn mower off. 8.
  • Page 21: Technical Data

    Technical Data Technical Data Table 2*18V Voltage No load speed 4200 /min Cutting diameter 340mm Front wheel diameter 140mm Rear wheel diameter 160mm Cutting height 25-75mm Cutting height positions 6 positions Grass collection capacity Machine weight 11 kg (including battery) Protection class Charger input (ACG1820D2) 100-240V~50/60Hz, 50W...
  • Page 22: Warranty

    Warranty Our product is guaranteed to be free from quality and manufacturing defects for a period of 12 months. If your product becomes defective during this period, SRGS PTY LTD will offer you either a replacement, credit or refund where a product is faulty; wrongly described; different from the sample shown to you or do not do what they are supposed to do.

Table of Contents