Advertisement
Conceptronic CMT2D Firmware Upgrade Instructions
A. Suitable devices
This firmware upgrade is only suitable for Conceptronic CMT2D (Wired version).
Note:
This firmware upgrade is not suitable for the Conceptronic CMT2DW (Wireless version).
®
Copyright
2009 by Conceptronic – All rights reserved
www.conceptronic.net
Page 1 of 5
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Conceptronic CMT2D
Summary of Contents for Conceptronic CMT2D
- Page 1 Conceptronic CMT2D Firmware Upgrade Instructions A. Suitable devices This firmware upgrade is only suitable for Conceptronic CMT2D (Wired version). Note: This firmware upgrade is not suitable for the Conceptronic CMT2DW (Wireless version). ® Copyright 2009 by Conceptronic – All rights reserved www.conceptronic.net...
- Page 2 All stored data on the internal hard disk will not be affected by the firmware upgrade. Note: The Conceptronic CMT2D can only be upgraded by a USB storage device, like a USB stick or a USB hard disk.
- Page 3 (for example: ‘F:\UPDATE.WUP’ where F:\ is your USB storage device). Note: Do NOT put the firmware file in a folder on your USB storage device. The CMT2D must ‘see’ the firmware file directly on the USB storage device. For example: ‘F:\UPDATE.WUP’.
- Page 4 When the CMT2D is in the main menu, select ‘Setup’. In the ‘Setup’ menu, select ‘Version’. The CMT2D will show the Version screen where you can see the current firmware version of the CMT2D. This should be: Software version: 1.2.13.7870 Press the ‘Menu’...
- Page 5 E. Release notes CMT2D Version 1.1.13.7870: Added: Added Italian language CMT2D Version 1.1.13.7860: Initial release ® Copyright 2009 by Conceptronic – All rights reserved www.conceptronic.net Page 5 of 5...
Need help?
Do you have a question about the CMT2D and is the answer not in the manual?
Questions and answers