Superrollo GW60 Translation Of The Original Operating And Assembly Manual
  1. Manuals
  2. Brands
  3. Superrollo Manuals
  4. Remote Control
  5. GW60
  6. Translation of the original operating and assembly manual

Superrollo GW60 Translation Of The Original Operating And Assembly Manual

Electronic roller shutter belt winder
Hide thumbs Also See for GW60:
Table of Contents

Advertisement

Quick Links

Download this manual
EN
Electronic Roller Shutter Belt Winder superrollo GW60
Translation of the Original Operating and Assembly Manual
Item no. SR10060 / SR10065
Surface mounting
Flush mounting
BA10060-2 (03.16)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GW60 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Superrollo GW60

Summary of Contents for Superrollo GW60

  • Page 1 Electronic Roller Shutter Belt Winder superrollo GW60 Translation of the Original Operating and Assembly Manual Item no. SR10060 / SR10065 Surface mounting Flush mounting BA10060-2 (03.16)

  • Page 2: Dear Customer

    Dear Customer, With your purchase of a roller shutter belt winder superrollo GW60, you have chosen a quality product manufactured by superrollo. Thank you for the trust you have placed in us. These instructions..describe how to install, connect the electrical system and operate your roller shutter belt drive superrollo GW60.

  • Page 3: Table Of Contents

    Table of Contents Dear Customer, .........2 15. Erase settings ......... 42 General view ........4 16. Removing the flush-mounted belt winder (e.g. in the event Included in delivery ......6 of a move) ........43 Explanation of the safety 17. Flush-mounted belt winder, symbols used ........7 remove the belt in the event of Safety instructions ......8...

  • Page 4: General View

    1. General view Flush-mounted model Mounting frame Operating panel Reel compartment Screw cover Disengaging bracket Cable bushings Power supply connection Sun sensor connection Type plate (incl. manufacturer details) Surface-mounted model (see page 5) Wall bracket Operating panel Reel compartment Disengaging bracket Cable bracket Wall bracket front panel Power supply...
  • Page 5 1. General view Flush- and surface-mounted model 10. Belt insertion guide Up button Down button Sun button with indicator light Timer button with indicator light SET button...

  • Page 6: Included In Delivery

    Wall bracket for surface mounting, incl. front panel (not to be used for flush mounting) Check the details on the Universal belt winder GW60 type plate Belt adapter for mini belt 15 mm Mounting frame for flush mounting...

  • Page 7: Explanation Of The Safety Symbols Used

    3. Explanation of the safety symbols used Danger of fatal electric shock This symbol warns of danger related to electric current. It requires that safety precautions be taken to protect life. Important safety information This concerns your safety. Please observe all instructions marked with this symbol. NOTE In this way, we wish to make you aware of the following content in order to ensure optimal functionality.

  • Page 8: Safety Instructions

    The use of defective equipment can lead to personal injury and damage to property (electric shocks, short circuiting). Never use defective or damaged equipment. ◆ Check the superrollo GW60 and the provided mains adapter beforehand for ◆ damage. Should you discover damage to the equipment, please consult our customer ◆...
  • Page 9 For this reason, the superrollo GW60 has an automatic running time limit (KB) of five minutes. If the running time limit is triggered, then the superrollo GW60 must be left for at ◆ least 30 minutes to cool down. Full operational availability is re-established after approx.

  • Page 10: Intended Use

    Mechanical locks of any kind are not suitable for automated operation with this device. Only use the manufacturer's original spare parts. By doing so, you avoid risk of malfunctions and damage to your superrollo GW60. ◆ Only use the original mains adapter (type YS35-29240) ◆...

  • Page 11: Improper Use

    The actual values may vary due to local conditions. 4.2 Improper use Using the superrollo GW60 for any other purpose than previously mentioned is not permissible. There is a risk to life caused through short circuiting and electric shocks if the superrollo GW60 is used outside.

  • Page 12: Functional Description

    5. Functional description The superrollo GW60 is an electric roller shutter belt winder designed for use inside. With its variable installation options, it can either be used as a surface-mounted device or as a flush-mounted device. The power supply is provided via the enclosed mains adapter.
  • Page 13 If the drive jams in the UP (▲) cycle (for example, due to ice), the belt winder will also switch off. First, remove the cause of the overload. ◆ Then the superrollo GW60 is fully operational again in both directions. ◆...

  • Page 14: Safety Instructions For The Installation

    6. Safety instructions for the installation Poor routing of the belt can cause the belt to fail and leads to unnecessary loads on the belt winder. Install the belt winder so that the belt runs as straight as possible into the device, ◆...

  • Page 15: Flush Mounting

    7. Flush mounting Remove the old belt winder, if you are carrying out a conversion to an existing roller shutter system. Let the roller shutter move down ◆ fully, until the slats are completely closed. Remove the old belt winder and ◆...
  • Page 16 7. Flush mounting Insert the required belt inlet. Belt inlet for: This will ensure the correct functioning Mini belt Standard belt of the respective belt. 23 mm 15 mm IMPORTANT The belt inlet must be installed before the mounting frame. Attach the mounting frame and click into place.
  • Page 17 7. Flush mounting Use the provided mounting holes. Two mounting holes are required to fasten the belt winder. Generally, it is possible to make use of the existing installation holes to screw the belt winder in place. If this is not the case, push the belt winder into the belt box and draw on the required mounting holes;...
  • Page 18 7. Flush mounting Connect the mains adapter and the sun sensor. The ridge should face upwards with both Now, connect the mains adapter and, plugs. if desired, the sun sensor on the back of the belt winder. CAUTION Connecting the plugs in the wrong way may destroy the belt winder.
  • Page 19 7. Flush mounting IMPORTANT Comply with the traction relief. It is imperative that both connecting cables are laid with traction relief so that they can no longer be pulled out of the device after installation. Comply with the traction relief Damaged cables may lead to malfunctions.
  • Page 20 7. Flush mounting Screw the belt winder tightly. Slide the belt winder into the belt box and screw it tight using the assembly screws provided. IMPORTANT Pay attention to connecting cables. Feed both connecting cables through the grooving of the mounting frame on the bottom side of the belt winder, as described on page 18.
  • Page 21 7. Flush mounting Feed in the belt. Draw-in the belt into the belt winder Belt inlet from the top. Pull the belt over the fastening hook. Belt end Continue to feed the belt into the de- vice as shown in the bottom sectional diagram and subsequently slide the belt over the fastening hook from below.
  • Page 22 7. Flush mounting Optionally, mount the belt adapter. Only required with mini belt (15 mm width), otherwise continue with point 14. For an optimum belt guide to be achieved for mini belts, the provided belt adapter must be pushed into the reel compartment after feeding in the belt.
  • Page 23 7. Flush mounting Mounting the sun sensor. Secure the sun sensor to the window pane using the suction cup. The position of the sun sensor on the window pane determines the point at which the roller shutters will close to in the event of sunlight. Commissioning.

  • Page 24: Surface Mounting

    8. Surface mounting Remove the old belt winder, if you are carrying out a conversion to an existing roller shutter system. Let the roller shutter move ◆ down fully, until the slats are completely closed. Remove the old belt winder ◆...
  • Page 25 8. Surface mounting Mounting on window frames, etc. Weak window frames may break When mounting on window frames, please check their structure and load capacity. ◆ Especially when mounting onto designs made of synthetic materials, the fastening screws must be screwed tight and must not loosen during operation. If required, ask your window manufacturer before fastening the belt winder onto ◆...
  • Page 26 8. Surface mounting Mounting holes (if required). Subsequently drill the mounting holes with a 6 mm masonry drilling machine and place the provided mounting wall plugs into the drilled holes. Screw the wall bracket tightly. Next, screw on the wall bracket tightly with the screws provided.
  • Page 27 8. Surface mounting Connect the mains adapter and the sun sensor. Now, connect the mains adapter and, if desired, the sun sensor on the back of the belt winder. CAUTION Connecting the plugs in the wrong way may destroy the belt winder. Power Plug both plugs true to side into ◆...
  • Page 28 8. Surface mounting Press the provided screw caps onto the housing screws. Open the operating panel. The operating panel can be opened by pressing lightly and levering open with a flat screwdriver. Draw-in the belt into the belt wind- er from the top. Belt inlet...
  • Page 29 8. Surface mounting Pull the belt over the fastening hook. Continue to feed the belt into the de- vice as shown in the bottom sectional diagram and subsequently slide the belt over the fastening hook from above. Fastening hook Belt end Belt path when surface-mounted.
  • Page 30 8. Surface mounting Optionally, mount the belt adapter. Only required with mini belt (15 mm width), otherwise continue with point 16. For an optimum belt guide to be achieved for mini belts, the provided belt adapter must be pushed into the reel compartment after feeding in the belt.
  • Page 31 8. Surface mounting Mounting the sun sensor. Secure the sun sensor to the window pane using the suction cup. The posi- tion of the sun sensor on the window pane determines the point at which the roller shutters will close to in the event of sunlight.

  • Page 32: Check The Rotational Direction

    9. Check the rotational direction NOTE A different rotational direction has to be selected depending on the type of mounting (flush or surface). The rotational direction is set ex factory for flush mounting and must be corrected in the event of surface mounting. Please check the rotational direction prior to all other configurations as follows: press briefly, the belt should flow into the belt winder.

  • Page 33: Setting The End Points

    10. Setting the end points IMPORTANT The end points must be configured in order for the roller shutters to stop at the desired upper and lower positions. It is imperative that both end points are configured, otherwise malfunctions may occur. If the belt winder is operated without an end point setting, the drive will continue to run for as long as one of the two control buttons is actuated.
  • Page 34 10. Setting the end points Setting the wrong upper end point may lead to overload or damage the superrollo GW60 or the drive. Do not set the upper end point ◆ right up to the limit stop. Release the button promptly and ◆...

  • Page 35: Manual Operation

    10. Setting the end points Changing or correcting the end points Move the roller shutters to the centre position and configure the respective end point again. NOTE After a period of time it may be necessary to reconfigure the end points as the belt may elongate during the process of operation.

  • Page 36: Automatic Mode; Configuring The Opening And Closing Times

    11. Manual operation Open the roller shutters. Briefly pressing the button causes the roller shutters to move to the upper end point. Stop the roller shutters in the interim. Briefly press any random button. Close the roller shutters. Briefly pressing the button causes the roller shutters to move to the lower end point.
  • Page 37 12. Automatic mode; configuring the opening and closing times Configure an opening time (▲) (e.g. at 8:00 AM) Simultaneously briefly press the buttons. The timer LED flashes ..the roller shutters travel upwards. The automatic mode is now switched on. Your roller shutters will open automatically every day at 8:00 AM.

  • Page 38: Automatic Mode; Auto / Manual Switchover

    13. Automatic mode; Auto / Manual switchover You can toggle between automatic and manual modes at any time if required. NOTE Manual operation of the roller shutters is possible at any time, regardless of the automatic settings. Press the clock button for approx.

  • Page 39: Automatic Solar Function

    14. Automatic solar function The automatic solar function enables brightness-dependent control of the roller shutters in combination with the sun sensor. To do this, the sun sensor is secured to the window pane with a suction cup and connected to the belt winder by means of a plug, see page 18 and page 27.

  • Page 40: Switch The Automatic Solar Function On/Off

    14. Automatic solar function Automatic clearing After approx. 20 minutes, the roller shutter is automatically raised a small amount to uncover the sensor. If the After sun continues to shine, then the roller 20 mins shutter remains in this position. If the brightness decreases below the set limit, it returns to the upper end point.

  • Page 41: Set Limit

    14.2 Automatic solar function; set limit The automatic solar function is switched on by setting or changing the set limit. Set the current brightness as set limit and switch on the automatic solar function. Simultaneously press the buttons. The current brightness is now the set limit.

  • Page 42: Erase Settings

    15. Erase settings If necessary, you can erase all of your settings and return the original factory settings. Simultaneously press and hold the buttons for 4 seconds. Release the buttons..., ... subsequently all of the settings will be deleted. End points ◆...

  • Page 43: Removing The Flush-Mounted Belt Winder

    16. Removing the flush-mounted belt winder (e.g. in the event of a move) Erase all settings. Fully close the roller shutters. Press and hold the button. In doing so, pull out the belt as far as possible from the top of the belt winder.

  • Page 44: Flush-Mounted Belt Winder, Remove The Belt In The Event Of Unit Failure

    17. Flush-mounted belt winder, remove the belt in the event of unit failure In the event that the belt winder unit fails and the motor no longer runs, you can use the disengaging bracket Drive release provided in order to fully remove the belt from the belt winder unit, without the need for cutting it.

  • Page 45: Removing The Surface-Mounted Belt Winder

    18. Removing the surface-mounted belt winder (e.g. in the event of a move) Erase all settings. Fully close the roller shutters. Press and hold the button. In doing so, pull out the belt as far as possible from the top of the belt winder.

  • Page 46: Surface-Mounted Belt Winder

    19. Surface-mounted belt winder, remove the belt in the event of unit failure In the event that the belt winder unit fails and the motor no longer runs, you can use the disengaging bracket provided in order to fully remove Drive release the belt from the belt winder unit, without the need for cutting it.

  • Page 47: What To Do If

    20. What to do if... ? Fault Cause / solution ... the belt winder indicates no Check the power supply incl. connecting cable functions? and plug..the belt winder fails to react at the There may have been a power failure. configured switching time? Reconfigure the switching times, see page 36.
  • Page 48 20. What to do if... ? Fault Cause / solution ... the roller shutters stop during The roller shutters may have hit an downward travel? obstacle. Move the roller shutters back up and remove the obstacle. b) The roller shutters are too light. Increase the weight of the roller shutters by, for example, adding a piece of flat steel to the bottom slat.

  • Page 49: Information About Maintenance And Care Of Your Equipment

    It may become less stable when used over a longer period of time. Damaged components should be exchanged by a specialist roller shutter firm. ◆ Maintenance You can clean the superrollo GW60 using a damp cloth. Please do not use aggressive or abrasive cleaning agents.

  • Page 50: Technical Specifications

    22. Technical Specifications Power supply operating voltage: 230 V / 50 Hz Standby power: 0.7 W Nominal power: 24 V DC / 30 W max. 45 W Torque: MdN = 2.8 Nm Max. speed: 34 rpm End tractive force: 7 kg Max.

  • Page 51: Dimensions Flush-Mounted

    22.1 Dimensions flush-mounted device All dimensions in mm.

  • Page 52: Dimensions Surface- Mounted Device

    22.2 Dimensions surface-mounted device 37.5 34.5 135.7 All dimensions in mm.

  • Page 53: Ce Mark And Ec Declaration Of Conformity

    23. CE Mark and EC Declaration of Conformity The electronic roller shutter belt winder superrollo GW60 (item no. SR10060 / SR10065) complies with the requirements of the current European and national directives: 2006/42/EC Machinery Directive 2014/30/EU EMC Directive Conformity has been verified. The corresponding declarations and documentation are available on file at the manufacturer’s premises.

  • Page 54: Warranty Conditions

    24. Warranty conditions superrollo Hausautomatisierung GmbH provides a 24-month warranty for new systems that have been installed in compliance with the installation instructions. All construction faults, material defects and manufacturing defects shall be covered by the warranty. Your statutory warranty claims shall remain unaffected by this warranty.
  • Page 56 Hausautomatisierung GmbH Gewerbepark 1 01156 Dresden (Germany) * 30 seconds free of charge, subsequently 14 cents / www.superrollo-online.de minute from German fixed line networks and max. Service Hotline: 01807 001-655 * 42 cents / minute from German mobile networks.

This manual is also suitable for:

Sr10060Sr10065

Table of Contents