Sony COM-2 Operating Instructions Supplement 2 Quick Start Manual page 16

Wireless network set up
1
Preparation
2
 Select a wireless
network to which
to connect
Tap the wireless
network name to
register.
1
Settings
Note
Be careful to use only networks that you trust.

When you use a wireless network that does not require a security
encryption key, you can skip the following set up procedure.
When you tap "network name, " the unit starts to register the wireless
network.
If no wireless network name is displayed
If the unit does not detect any network, no network names are

displayed.
This means the unit is not in a good wireless reception area, or the
networks in the area are not broadcasting the network names
(SSID's). Change your location to a better reception area, and tap
"Scan" to search for a wireless network. If the wireless network you
wish to connect to is not broadcasting the SSID, you can add the
wireless network manually by tapping "New. "
If the "Connection Manager" is not displayed on the
screen
Perform the following:

1 Tap the INFO button
2 Tap the Connection Manager
2
Settings
3
Registration