Table of Contents
Advertisement
To reactivate the electromagnetic brake:
1. remove the M5x30 screws;
2. insert the previous plastic screw caps about 5 mm (screw
them in as far as they will go);
3. connect the brake electrically by attaching the connector;
4. replace the inverter panel.
D
C
E
F
G
H
44
7.8 CLEANING
All cleaning operations must be carried out with the vehicle
disconnected from the power supply.
When cleaning the vehicle, do not use aggressive detergents
or solvents that could damage the bodywork. It is particularly
recommended not to wash the steering wheel with detergents/
chemical agents, as this could cause deterioration.
Use a cloth soaked in soapy water and dry thoroughly. Never
wash and dry your vehicle in direct sunlight to avoid damaging
the bodywork.
Take special care when cleaning the windscreen. Use a damp
microfibre cloth and neutral window cleaner.
Failure to do so may result in irreversible scratches on the
windscreen.
WARNING! It is absolutely forbidden to use water jets,
even at low pressure: electrical components could be
damaged. Before washing the vehicle, check that the
vehicle charging socket cap and the USB charging socket cap
are properly sealed.
45
Advertisement
Table of Contents
