Operation; Control Panel; Replacing The Light Bulb - vissari VISPP900S Product & Installation User Manual

Table of Contents

Advertisement

O P E R AT I O N
Turn the rangehood fan on 5-10 minutes before starting to cook.
Turn the rangehood fan off 10-15 minutes after you finish cooking.

Control Panel

Press + to switch on the fan. The timer will only operate when the fan is switched on.
Press – to decrease the fan speed
Press + to increase the fan speed
To switch on or off the lights
Up to 15 minutes timer setting and fully adjustable. When you press the timer
button the digital display will change to "00" timer mode. You can adjust your
timer mode (up to 15 minutes) by pressing "–" or "+"

Replacing the Light Bulb

DANGER
Step 1
Remove the filters
from the rangehood.
VISSARI ONBOARD PRODUCT & INSTALLATION USER GUIDE
08
MODEL VISPP900S
Always switch off and disconnect power before replacing the light.
Failure to do so may cause serious injury. Please be aware that the light
bulb will retain heat for a short period of time after being switched off.
Step 2
Gently turn light bulb anti-
clockwise, pull the light
bulb down and remove it
from the light holder.
Step 3
Insert a new bulb by lining up
the pins of the light bulb with the
larger holes inside the light holder.
Once the pins are in place, turn
clockwise to secure the light bulb.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Visbc900Visc900Visbc600

Table of Contents