Zenith HydroTap G5 Quick Start Installation Manual page 11

B20, BA20, B Home, BA Home models
• Cold air is drawn in through the inlet vent and lower gap provided by the
door buffers.
• Inlet vent is mounted over cupboard side, door or floor cut-out.
• Warm air is exhausted through the upper gap provided by the door
buffers.
4
mm door buffers
(supplied)
All models
If cupboard temperature exceeds 35°C, additional ventilation is required.
Contact your Zenith service provider for options (including additional vents
and fan kit).
Quick Start Installation Guide
806836NZ v1.00 01.21 G5 B BA Quick Start Guide
SECTION 6: Set up the ventilation
Air outlet
Air inlet
Inlet vent
11