Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Suokone CR 1400
- Page 1 Operator’s manual - Mulcher CR 1400 www.suokone.com MERICARE www.mericrusher.com...
-
Page 2: Table Of Contents
CR 1400 Table of Contents Introduction _________________________________________________________ 2 Safety instructions ____________________________________________________ 3 General safety instructions __________________________________________ 4 Instructions for safe use _____________________________________________ 4 Safety instructions for maintenance and service __________________________ 5 Description and location of decals on the mulcher_________________________ 6... -
Page 3: Introduction
When receiving the delivery of this product check that there are no damages from transport or missing parts. In case of trouble contact your sales representative, importer, or manufacturer - we’d be happy to help! Suokone Oy Generic name of the machine:Mulcher Type of machine:CR 1400 Serial number: Date of delivery: Original language:Finnish Manufacturer’s address: Lastaajantie 1 FI-88610 Vuokatti, FINLAND ☏... -
Page 4: Safety Instructions
CR 1400 Safety instructions ATTENTION! Read this Operator’s manual carefully before using the mulcher. Improper use or misuse can cause injuries and also damages to the machinery. The topics highlighted with the following symbol are related to safety, and they must be read carefully. The following signal words are used: WARNING! Important safety information. -
Page 5: General Safety Instructions
CR 1400 2.1 General safety instructions Familiarize yourself carefully with this manual and make sure that you have understood the in- structions regarding the mulcher and related information. Everyone using the Mulcher must follow the given instructions. If the mulcher is given temporari- ly to other user than the owner of the machine, or if it is rented, make sure that the user has read this manual and understood safe and proper use of the machine. -
Page 6: Safety Instructions For Maintenance And Service
Check this from the manufacturer of the base machine or the authorized dealer of the base machine. Suokone Oy is not responsible of compatibility or usability of the hydraulics of the base machine to operate this at- tachment. -
Page 7: Description And Location Of Decals On The Mulcher
CR 1400 2.4 Description and location of decals on the mulcher • The identification plate includes information about the type, weight, serial number, and year of manufacture. The identification plate is located on top of the hydraulic motor. • The lubrication points are marked with a red round label. -
Page 8: Technical Specifications
CR 1400 Technical specifications • Dimensions TECHNICAL SPECIFICATIONS UNIT CR 1400 Height h Width L 1570 Width L1 Width L2 Width L3 Weight Width of rotor Lr 1350 Diameter of rotor Dr Number of blades, T25 rotor Working depth, max. -
Page 9: Designed Purpose Of Use
CR 1400 • Main components of the mulcher 1 Rotor 2 Hydraulic motor 3 Coupling plate 4 Support skids 5 Hydraulic quick connector 6 Counterblade / protective rubber 3.1 Designed purpose of use Mulchers are intended for conditioning of soil in different operating areas. Mulcher are well suit- ed for landscaping, farms, green area maintenance, and municipalities. -
Page 10: Operating Principle
CR 1400 3.2 Operating principle The mulcher is hydraulically operated. The hydraulic motor in fitted directly on the rotor shaft. Power from the base machine is transferred hydraulically. There are blades on the rotating rotor to crush the material that is handled. -
Page 11: Coupling And Uncoupling Of The Mulcher
CR 1400 Coupling and uncoupling of the mulcher Coupling and uncoupling of the mulcher When coupling or uncoupling the mulcher form the base machine always make sure to eliminate the risk of getting crushed. Ensure that the mulcher is on solid, level ground and supported be- fore disconnecting it from the base machine. -
Page 12: Using The Mulcher
CR 1400 Using the mulcher 5.1 Equipment 1. Counterblade The counterblade minimises the space between the frame and the rotor. The material being mulched is forced to go through the rotor and the counterblade. The counterblade improves the mulching performance. -
Page 13: Working And Adjustments
CR 1400 5.2 Working and adjustments Adjust the operating speed and depth so that the mulcher runs smoothly. • Set the engine rpm of the base machine while the mulcher is lifted off the ground. • Switch on the hydraulics while the mulcher is lifted. -
Page 14: Lifting / Storage
CR 1400 Lifting / storage Lifting Warning! Lift the mulcher only from the dedicated points, always using ap- proved type lifting equipment, chains, and ropes! Storage Store the mulcher on a covered area, on a platform, after cleaning and after adding grease to... -
Page 15: Maintenance / Service
CR 1400 Maintenance / Service Additional service tasks for a new mulcher: Tighten bolts and nuts after the first two hours of use. Check the hydraulic hoses / motor for possible oil leaks, and if necessary, tighten fit- tings. 7.1 Lubrication... -
Page 16: Wear Parts
CR 1400 Wear parts • Check and replacement of wear parts Warning! Always use safety goggles when replacing blades. During welding and other service use appropriate personal protective equipment. STD- Rotor 1. Remove locking nut 2. Punch the broken blade loose... - Page 17 CR 1400 • Check and replacement of blade holders Remove the damaged blade holder (A) and place a new holder (B) onto the place of the old one. Check the correct welding spots on the rotor from the other non-damaged blade holders.
- Page 18 CR 1400 1.Counterblade Worn counterblade can be replaced with a new one, or the worn edge of the blade can fill weld- ed using hard weld Esab Weartrode 55HD, or similar according to ISO EN 14700, E Z Fe 6.
-
Page 19: Warranty Terms
CR 1400 8 Warranty terms The warranty covers all defects related to raw materials and manufacturing defects for a period of 6 months starting from the date of delivery. Faulty and damaged parts must be shipped to the manufacturer accompanied with a covering letter that includes the following information: 1. -
Page 20: Ec Declaration Of Conformity
CR 1400 EC Declaration of Conformity (Directive 2006/42/EV, Annex IIA; en) Suokone Oy Manufacturer: Contact details: Lastaajantie 1, 88610 VUOKATTI, FINLAND, +358 8 666 2011 Mulcher_____________ (name:) CR 1400_____________ (type:) _______________________ (serial number:) I declare that the machine placed on the market fulfils the Machinery Directive (di- rective 2006/42/EC) as amended and the national provisions implementing those.
Need help?
Do you have a question about the CR 1400 and is the answer not in the manual?
Questions and answers