Advertisement
S5 Remove the
main board and
power board
10
Use a Philips-head
screwdriver to remove 4
screws for unlocking the
main frame
(No.1~4 screw size=M3x4,
Torque: 3±0.5kgf.cm)
Turn over the
mainframe, tear off tape
and disconnect the FFC
cable. Remove the
mylar.
Use a Philips-head
screwdriver to remove 11
screws for unlocking the
main board and power
board.
(No.1~10 screw size=D3x6,
Torque=6±1kgf.cm
No.11 screw size=M4x6,
Torque=6±1kgf.cm
Advertisement
