Table of Contents
Advertisement
② Port close
When completing the software, click on "Close" button to close the serial port through which this unit
is connected.
The port selection screen as shown on the previous page will appear again when the port close
operation is successful. In the screen, click on
If the screen is not displayed , confirm that this unit is powered ON and the serial cable is correctly
connected.
③ "Default" button
When this button is clicked on, all the settings of this unit return to those at the product shipment.
④ Image clarifying processing strength adjustment
OFF (Default at shipment) /Normal/Enhance
⑤ Noise filter strength adjustment
Soft (Default at shipment)/Hard
⑥ Black level adjustment
Setting range: 0 – 32 (0: Default at shipment)
⑦ Brightness adjustment
Setting range: 0 – 100 (50: Default at shipment)
⑧ Status display
OFF (Default at shipment)/ON
⑨ Quad (For quad partition image) processing switch over
OFF (Default at shipment)/ON
* Setting items and setting options are the same as those operative by the buttons on the
unit. Refer to "5.Descriptions of Functions" for details.
② ③
④
⑥
⑧
×
icon to close the software.
9
⑤
⑦
⑨
Advertisement
Table of Contents
