Download Print this page

Floe 511-01351-00 Assembly Instructions

12v solar panel kit

FLOE 12V SOLAR PANEL KIT

ASSEMBLY INSTRUCTIONS

KIT P/N 511-01351-00

IMPORTANT NOTE: IF INSTALLING A 24 VOLT

SYSTEM, PLEASE USE STEPS 1 AND 2 OF THE 12

VOLT SOLAR PANEL INSTRUCTIONS AND THEN

REFER TO STEP 3 OF THE 24 VOLT SOLAR PANEL

ADD-ON INSTRUCTIONS. PLEASE NOTE THAT IT

WOULD BE VERY HELPFUL TO READ THROUGH

COMPLETELY BOTH SETS OF INSTRUCTIONS

BEFORE ASSEMBLY.

INSTRUCTION P/N 611-01351-00

ISSUED: 6/3/2010

SHEET 1 OF 4

TOOLS REQUIRED

- 1/2" WRENCH

- 3/4" SOCKET

- SMALL FLAT HEAD SCREW DRIVER

- TORQUE WRENCH

KNIFE OR SCISSORS

Floe International, Inc.

48473 State Hwy. 65

McGregor, MN 55760

Table of Contents

Do you have a question about the 511-01351-00 and is the answer not in the manual?

Page 1 FLOE 12V SOLAR PANEL KIT ASSEMBLY INSTRUCTIONS KIT P/N 511-01351-00 IMPORTANT NOTE: IF INSTALLING A 24 VOLT SYSTEM, PLEASE USE STEPS 1 AND 2 OF THE 12 VOLT SOLAR PANEL INSTRUCTIONS AND THEN REFER TO STEP 3 OF THE 24 VOLT SOLAR PANEL ADD-ON INSTRUCTIONS.
Page 2 FLOE 12V SOLAR PANEL KIT EXPLODED VIEW AND BOM KIT P/N 511-01351-00 PARTS LIST, SOLAR PANEL 12 VOLT ITEM PART NUMBER DESCRIPTION 001-70060-00 HHCS, 5/16-18 X 1 3/4" SS 001-70205-00 HHCS, 1/2-13 X 1" SS 001-70207-00 HHCS, 1/2-13 X 1 1/4" SS 001-70861-00 NUT, NYLOCK 5/16-18 - ALUM.
Page 3 STEP 1 - ASSEMBLE MAST MOUNT BRACKET BRACKET START 1/2" NYLOCK NUTS ONTO BOLTS, DO NOT TIGHTEN UNTIL STEP #6 INSERT (2) 1/2 X 1 1/4" BOLTS THROUGH WASHER AND BRACKET. SLIDE 1/2" ALUM. NUT INTO NUT TRACK ON BRACKET START 1/2 X 1"...
Page 4 STEP 4 SLIDE 1/2" NUT INTO START 1/2 X 1" BOLT INTO NUT NUT TRACK IN NUT TRACK, DO NOT ASSEMBLE SOLAR PANEL TO MOUNT TIGHTEN UNTIL STEP 5 INSERT BOLTS FROM NUT TRACK STEP 3 THROUGH CENTER HOLE ON MOUNT FIG.