POMPE POLYBLOC
POLYBLOC PUMP
Single-phase pump terminal board
▪ Neither the motor nor any of the live parts must come into contact with water.
▪ Make sure the electrical wires are sheathed.
▪ Check the correct positioning of the cable at the terminal board input in order to avoid any water seeping in through
the wire passage.
3.2 HYDRAULIC SYSTEM
▪ Connect the pump to the hydraulic circuit using the couplings provided.
▪ Connection of the pipes with supplied fittings must be done by gluing and without any stress due to misalignment.
3.3 OPERATION
▪ The pump should operate without making any noise or vibrations.
▪ Check for any leaks on a regular basis.
▪ Always stop the pump before handling the valve on your filter (6-way) on the swimming pool's hydraulic circuit.
ACIS 15 Rue des Marais 44310 ST Philbert de Gd Lieu – Tel. 02 40 59 95 35 – www.acis-france.com
7