Confirmation signals
You can activate or deactivate the confirmation
signals.
For operating principle refer to page 59.
1.
Switch on the ignition, refer to page 47.
2.
Lightly push button 1 in the turn indicator
lever up or down repeatedly until the sym-
bol appears in the display accompanied by
the word "SET".
3.
Press button 2.
4.
Lightly push button 1 in the turn indicator
lever down repeatedly until the desired
symbol appears in the display.
>
Confirmation signal during unlocking
>
Confirmation signal during locking
5.
Press button 2.
6.
Use button 1 to select:
>
The hazard warning flashers light up
during unlocking/locking.
>
The function is deactivated.
7.
Press button 2.
The setting is stored.
Online Edition for Part no. 01 41 2 600 853 - © 08/08 BMW AG
Malfunctions
The remote control may malfunction due to
local radio waves. If this occurs, unlock and lock
the car at the door lock with the integrated key.
Coupe: in vehicles without an alarm system
*
convenient access
, only the driver's door can
be unlocked and locked using the integrated
key in the door lock.
If the car can no longer be locked with a remote
control, the battery in the remote control is dis-
charged. Use the remote control on an
extended trip to recharge the battery, refer to
page 18. The remote control for convenient
access contains a battery that may have to be
changed, refer to page 27.
For US owners only
The transmitter and receiver units comply with
part 15 of the FCC/Federal Communications
Commission regulations. Operation is gov-
erned by the following:
FCC ID:
LX8766S
LX8766E
LX8CAS
Compliance statement:
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
>
This device must not cause harmful inter-
ference, and
>
this device must accept any interference
received, including interference that may
cause undesired operation.
Any unauthorized modifications or
changes to these devices could void the
user's authority to operate this
*
or
equipment.<
21