PowerMax AKD58-50 Instructions Manual

Automatic sewing machine Servo controller instructions
Preface
CAUTION:
This product is designed for specified sewing machines and must
not be used for other purposes.
If you have any problem or any comment, please feel free to
contact us.
Safety Instruction
All the instruction marked with sign
（1）
observed or executed; otherwise, personal injuries or risk to the
machine might occur.
This product should be installed and operated by persons
（2）
with appropriate training only.
（3） Before connecting power supply cords to power sources, it's
necessary to make sure that the power voltage is in the range indicated
on the product name plate.
（4） Make sure to move your feet away from the pedals while
power on.
Turn off the power and remove plug prior to the following
（5）
operations:
■ Connecting or disconnecting any connectors on the control box；
■ Repairing or doing any mechanical adjustment；
■ Threading needle or raising the machine arm；
■ Machine is out of work.
Make sure to fasten all the fasteners firmly in the control
（6）
boxes prior to the operation of the system.
Allow an interval of at least 30 seconds before repapering the system
（7）
after power off.
Please read this manual carefully, also with
related manual for the machinery before use the
controller. For installing and operating the
controller properly
personnel are required.
Page 1 of 16
and safely, qualified
must be absolutely