BMW 2008 X3 Owner's Manual page 24

you will always be able to unlock the vehicle
from outside.<
You can set an acoustic signal to remind
you if the ignition key is still in the ignition
lock after you open the driver's
Liftgate
To avoid damage, make sure there is suf-
ficient space when opening the
Opening from outside
Press the button, refer to arrow, or the
ton on the remote control. The liftgate opens
slightly. It can be pivoted upward.
When the liftgate is open, the cargo area and
interior are illuminated.
Opening manually
In the event of an electrical malfunction:
1. Lift up the floor cover in the cargo area.
2. Release the jack from the bracket.
3. Press the lever behind the cover to the side,
refer to arrow. The liftgate is released.
The liftgate is locked again as soon as it is
closed.
22
Online Edition for Part no. 01 41 0 014 250 - © 08/07 BMW AG
Closing
door.<
liftgate.<
The handle recesses on the interior trim of the
liftgate make it easier to pull down.
structed.<
Windows
bodily injury.
but- Always remove the key when leaving the vehi-
cle; otherwise, children could operate the win-
dows and injure
Opening, closing
With the ignition key in position 1 or higher:
>
>
You can close the windows in the same manner
by pulling the switch.
Avoid injuries by making sure that the lift-
gate's closing region is clear and unob-
Keep windows in your line of sight while
closing. Failure to do so can result in
themselves.<
Press the switch to the resistance point:
The window continues to open as long as
you press the switch.
Press the switch past the resistance point:
The window opens automatically. Pressing
again stops the opening motion.