Beast RS25 Instruction Manual

INTRODUCTION
Welcome to the Beast family! Thank you for putting your trust in
our components. You have chosen one of the sturdiest, lightest,
best quality products there is. Genuine craftsmanship - developed,
designed and manufactured in Germany.
Your safety is very important to us, so please read this manual
carefully before you install your new Beast Components product or
ride it for the first time. Third party users must also be informed
about the following provisions. Therefore, please keep these
instructions in a safe place for later usage.
These operating instructions are intended for the user of the
wheelset and includes information on the installation, handling,
maintenance and care of the wheelset. Please follow all instructions.
Your Beast Components-Team
Release your Beast and share experiences with our community!
#beastcomponents #releaseyourbeast #beabeast
ATTENTION:
Incorrect handling, installation, maintenance or servicing
can lead to accidents causing severe injuries or death!
WARRANTY & SERVICE
OUR PROMISE
We manufacture the highest quality products for your bike and also
want to ensure the best possible service and support. Therefore we
offer the original owner of Beast Components products a 5-year
warranty and a lifetime crash replacement program for our entire
product range.
PRODUCT REGISTRATION
To get the manufacturer's warranty and to participate in the crash
replacement program, you must register your components. Send us
an email with a copy of the invoice and the following information to
registrierung@beast-components.de:
Name, First Name
Address
Phone number
Page 1
INSTRUCTION MANUAL
5 YEARS MANUFACTURER WARRANTY
We vouch for the quality of our products „Made in Germany". This
is why we warrant our carbon products to be free from defects in
material or workmanship for five years from the original purchase
date (product registration required).
Modified, misplaced, misused, improperly installed or obviously
abused Beast Components products are not covered by this
warranty.
Based on this warranty, the company Black East GmbH is not liable
for compensation, especially not for indirect damage caused by
accidents, collateral damage and consequential damage.
LIFELONG CRASH REPLACEMENT
We offer the original owners of Beast Components products a
lifetime crash replacement program that covers all damages
(optical damages are excluded) outside of the warranty, whether
self-inflicted or third-party caused (product registration required).
In this case we guarantee you a one-time discount of 50% on
our recommended retail price if you decide to buy any new Beast
Components product in the same product category.
Please note that VAT, packaging, shipping and installation costs and
any import duties are not covered.
INTENDED USE
The intended use of Beast Components products is divided into
six categories, from riding on paved roads to downhill and freeride
use. Details can be found in the enclosed classification or at www.
beast-components.de/service. Beast Components products may
only be used within or below the intended category. Otherwise the
user takes full responsibility.
CATEGORY 1 / ROAD: RS25, RX25, RR40, RX40, RX60, RX80
CATEGORY 2 / LIGHT GRAVEL: GR40
CATEGORY 3 / XC & HARD GRAVEL: GR25, XC25, XS30, XC30
CATEGORY 4 / TRAIL & ALL MOUNTAIN: TR30
CATEGORY 5 / ENDURO & HYBRID: ED30, HY30, HY35
CATEGORY 6 / DH: DH30
WHEELSET
V2021.01